Abstract:Due to high global warming potential (GWP) of hydrofluorocarbons (HFCs), the separation and recovery of HFCs from different refrigerant mixtures is an important issue. Most HFC mixtures are azeotropic in nature, thereby rendering the conventional distillation-based separation difficult and energy intensive. Extractive distillation (ED) with ionic liquid (IL) as solvent provides an attractive strategy for selective separation of HFC mixtures. However, systematic design and optimization of ED-based separation processes is nontrivial. In this work, we present SPICE_ED which is a software framework for the detailed design, synthesis, and techno-economic analysis of ED-based separation processes. The framework employs a building block representation followed by superstructure optimization that is able to automatically generate numerous design solutions and screen the best without requiring prior expert knowledge of candidate configurations. For a given IL as solvent and a set of design specifications, one can automatically determine the feasibility of the solvent and obtain the optimal process flowsheets that correspond to minimum energy consumption, minimum separation cost, or minimum emission/waste. We demonstrate the capability of SPICE_ED for the separation of R-410A (50 wt % R-32 and 50 wt % R-125) using [bmim][PF6], a commonly used IL. Our optimized design requires an equivalent work of only 338.2 kJ/kg R-410A, which is about 48% less than the previously reported value of 656 kJ/kg. The newly identified design also achieves more than 47% and 27% reductions in CO2-equivalent emission (sustainability) and cost, respectively. Through multiobjective optimization, we further identify an operating regime to separate R-410A at a near-minimum cost without significantly increasing the energy consumption and emission. The processes obtained from SPICE_ED show excellent agreement with the key performance metrics when simulated in Aspen Plus, thereby establishing confidence in our designs as realistic and implementable.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.iecr.2c00136.Piecewise approximation of refrigerant's liquid phase specific enthalpy, physical parameters, building block superstructure for full scale optimization, and equipment capital cost functions (PDF)This article has not yet been cited by other publications.

Further separation of HFC-23 and HCFC-22 by coupling multi-stage PDMS membrane unit to cryogenic distillation

Extractive Distillation Process Using Organic and Ionic Liquids for the Separation of High-Gwp Refrigerant R410A: A Thermodynamic and Techno-Economic Assessment

One-step Removal of Alkynes and Propadiene from Cracking Gases Using a Multi-Functional Molecular Separator

Process optimization of CO2membrane and cryogenic hybrid separation

Efficiency Separation Process of H2/CO2/CH4 Mixtures by a Hollow Fiber Dual Membrane Separator

Preparation of continuous NH2–MIL-53 membrane on ammoniated polyvinylidene fluoride hollow fiber for efficient H2 purification

Fluorinated ZIF-71 with adjusted pore size to enhance separation performance of mixed matrix membrane for recovering R32 from R410A

Separation Process Synthesis for High-GWP Refrigerant Mixtures: Extractive Distillation using Ionic Liquids

High-efficiency CO2 separation using hybrid LDH-polymer membranes

Design of Ionic Liquids for HF/HFC-245fa Superefficient Separation: COSMO-RS Selection and Process Assessment

Multicomponent Refrigerant Separation Using Extractive Distillation with Ionic Liquids

Purification of R-12 for refrigerant reclamation using existing industrial-scale batch distillation: design, optimization, simulation, and experimental studies

Highly durable ZIF-8 tubular membranes via precursor-assisted processing for propylene/propane separation

Pervaporation Separation of Alkane/Thiophene Mixtures with Pdms Membrane

Poly(vinylidene Fluoride-Co-hexafluoro Propylene) Membranes Prepared Via Thermally Induced Phase Separation and Application in Direct Contact Membrane Distillation

Precise Helium Sieving from Hydrogen Using Fluorine‐Decorated Carbon Hollow Fiber Membranes

Silicalite-1/PDMS Hybrid Membranes on Porous PVDF Supports: Preparation, Structure and Pervaporation Separation of Dichlorobenzene Isomers

6FDA-polyimide thin-film composite hollow fiber membranes for hydrofluorocarbons and CO2 separations

Highly-efficient hydrogen purification with the T-C 3 N 2 membrane via strain and charge engineering as well as their synergistic effect

Ultraselective carbon hollow fiber membrane for H 2 extraction from blended natural gas

Exploiting the Interplay between Liquid-Liquid Demixing and Crystallization of the PVDF Membrane for Membrane Distillation