Abstract:Due to high global warming potential (GWP) of hydrofluorocarbons (HFCs), the separation and recovery of HFCs from different refrigerant mixtures is an important issue. Most HFC mixtures are azeotropic in nature, thereby rendering the conventional distillation-based separation difficult and energy intensive. Extractive distillation (ED) with ionic liquid (IL) as solvent provides an attractive strategy for selective separation of HFC mixtures. However, systematic design and optimization of ED-based separation processes is nontrivial. In this work, we present SPICE_ED which is a software framework for the detailed design, synthesis, and techno-economic analysis of ED-based separation processes. The framework employs a building block representation followed by superstructure optimization that is able to automatically generate numerous design solutions and screen the best without requiring prior expert knowledge of candidate configurations. For a given IL as solvent and a set of design specifications, one can automatically determine the feasibility of the solvent and obtain the optimal process flowsheets that correspond to minimum energy consumption, minimum separation cost, or minimum emission/waste. We demonstrate the capability of SPICE_ED for the separation of R-410A (50 wt % R-32 and 50 wt % R-125) using [bmim][PF6], a commonly used IL. Our optimized design requires an equivalent work of only 338.2 kJ/kg R-410A, which is about 48% less than the previously reported value of 656 kJ/kg. The newly identified design also achieves more than 47% and 27% reductions in CO2-equivalent emission (sustainability) and cost, respectively. Through multiobjective optimization, we further identify an operating regime to separate R-410A at a near-minimum cost without significantly increasing the energy consumption and emission. The processes obtained from SPICE_ED show excellent agreement with the key performance metrics when simulated in Aspen Plus, thereby establishing confidence in our designs as realistic and implementable.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.iecr.2c00136.Piecewise approximation of refrigerant's liquid phase specific enthalpy, physical parameters, building block superstructure for full scale optimization, and equipment capital cost functions (PDF)This article has not yet been cited by other publications.

Multicomponent Refrigerant Separation Using Extractive Distillation with Ionic Liquids

Extractive Distillation Process Using Organic and Ionic Liquids for the Separation of High-Gwp Refrigerant R410A: A Thermodynamic and Techno-Economic Assessment

Separation Process Synthesis for High-GWP Refrigerant Mixtures: Extractive Distillation using Ionic Liquids

Investigation on the Vapor–Liquid Equilibrium for the Ternary Mixture HFC-32 + HFC-125 + HFC-161 at Temperatures from 265.15 K to 303.15 K

Isothermal Vapor–Liquid Equilibrium of HFC-161 + DMETrEG Within the Temperature Range of 293.15–353.15 K and Comparison for HFC-161 Combined with Different Absorbents

Vapor–liquid Equilibria of HFC‐161 + HFC‐32 + DMF Ternary Mixture for Low‐grade Heat Driven Absorption Refrigeration System

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Isothermal Vapor−Liquid Equilibrium of (Pentafluoroethane + Fluoroethane) at Temperatures between (265.15 and 303.15) K Obtained with a Recirculating Still

Isothermal Vapor-Liquid Equilibrium Of (Pentafluoroethane Plus Fluoroethane) At Temperatures Between (265.15 And 303.15) K Obtained With A Recirculating Still

Isothermal Vapor–Liquid Equilibrium of the Ternary Mixture of 1,1,1,2-Tetrafluoroethane + 2,3,3,3-Tetrafluoroprop-1-ene + Dimethyl Ether at Temperatures from 253.15 K to 323.15 K

Ionic Liquids for the Separation of Fluorocarbon Refrigerant Mixtures

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

Design of Ionic Liquids for HF/HFC-245fa Superefficient Separation: COSMO-RS Selection and Process Assessment

Vapor–liquid Equilibrium of Difluoromethane +1,1,1,2-Tetrafluoroethane Systems over a Temperature Range from 258.15 to 343.15K

Investigation on Absorption and Separation Performance of R-32, R-125, R-134a, and R-1234yf Refrigerants Using EMIM-Based Ionic Liquids

Vapor-liquid Equilibrium Measurement and Heating Performance Modeling on Eco-Friendly Zeotropic Blends of CO2/R1234ze(Z) and CO2/R1336mzz(E)

Molecular dynamics investigation on the interaction of nitrile-based ionic liquids in the separation of azeotropic refrigerant R-513A

Vapor−Liquid Equilibrium Data for the Binary Mixture Difluoroethane (HFC-32) + Pentafluoroethane (HFC-125) of an Alternative Refrigerant

Solubility of Refrigerant Trifluoromethane in N, N-Dimethyl Formamide in the Temperature Range from 283.15 K to 363.15 K

OPTIMIZATION OF THE PERFORMANCE OF AN AUTO-CASCADE REFRIGERATOR WITH A LIQUID-GAS SEPARATOR USING ENVIRONMENTALLY BENIGN BINARY REFRIGERANTS

Isothermal vapor–liquid equilibrium data for the binary mixture ethyl fluoride (HFC-161) + 1,1,1,2,3,3,3-heptafluoroproane (HFC-227ea) over a temperature range from 253.15 K to 313.15 K