Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Purification of R-12 for refrigerant reclamation using existing industrial-scale batch distillation: design, optimization, simulation, and experimental studies

Extractive Distillation Process Using Organic and Ionic Liquids for the Separation of High-Gwp Refrigerant R410A: A Thermodynamic and Techno-Economic Assessment

A Comprehensive Study of Drop-in Alternative Mixtures for R134a in a Mobile Air-Conditioning System

Study on the Performance of a Novel Waste Heat Recovery System at Low Temperatures

Numerical investigations on the performance of a single-stage auto-cascade refrigerator operating with two vapor-liquid separators and environmentally benign binary refrigerants

Preliminary study on the performance of the diffusion absorption refrigerator operating with the mixed refrigerant

Investigating the Thermal-Hydraulic Performance of New Refrigerant Mixtures Through Numerical Simulation of Minichannel and Microchannel Evaporators

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Enhancement of a R-410A Reclamation Process Using Various Heat-Pump-Assisted Distillation Configurations

Study of a Novel Hybrid Refrigeration System for Industrial Waste Heat Recovery

Theoretical and experimental study on a novel mixture refrigerant of R161 +R227ea

A Study On A New Auto-Cascade Refrigerating Cycle

Separation Process Synthesis for High-GWP Refrigerant Mixtures: Extractive Distillation using Ionic Liquids

DESIGN OF INTEGRATED PROCESS OF DISTLLIATION AND PERVAPORATION FOR THE SEPARATION OF MTBE-C4-METHANOL MIXTURE

OPTIMIZATION OF THE PERFORMANCE OF AN AUTO-CASCADE REFRIGERATOR WITH A LIQUID-GAS SEPARATOR USING ENVIRONMENTALLY BENIGN BINARY REFRIGERANTS

Simulations and experiments of substitution of R41 for R23 in auto-cascade refrigeration cycle with rectifying column at -60℃

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

Sustainable design and multi-objective optimization of heat pump assisted extractive distillation process for separating a ternary mixture of methyl acetate, tetrahydrofuran and methanol

Performance of a Single-Stage Linde-Hampson Refrigerator Operating with Binary Refrigerants at the Temperature Level of −60 °C

The Simulation and Optimization of the Tetrafluoroethylene Rectification Process

Performance of a Single-Stage Auto-Cascade Refrigerator Operating with a Rectifying Column at the Temperature Level of −60 °C