Abstract:We reported a low-temperature solution-processed method for the fabrication of AlOx thin films in the memory device. The detailed study is carried out to figure out the effect of varying annealing temperatures (150, 200, 250, 300, and 350 degrees C) on resistive switching characteristics of solution-processed aluminum oxide dielectric. The dielectric properties of AlOx films under different annealing temperatures were evaluated by atomic force microscopy (AFM), thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) firstly. Then the AlOx films were used as the switching dielectric layer for a variety of low-temperature solution-processed oxide resistive random access memory (RRAM) devices. It was found that forming voltage increased with increasing annealing temperature and forming free behavior could be achieved by 200 degrees C sample. No repeatable resistance switching characteristics were observed in the devices with minimum (150 degrees C) and maximum (350 degrees C) annealing temperatures. Compared with the ALD-derived AlOx based RRAM devices in previous study, enhanced performance like small forming voltage, large resistance ratio (<180) and narrow resistance and voltage distribution was achieved by the solution-processed AlOx based ones at the optimized low annealing temperatures of 200 to 250 degrees C, which would be applied in the bionic circuit simulated by synapses and neural networks. All three samples (200, 250, and 300 degrees C) obtained switching endurance up to 300 cycles and data retention over 10(4) s. Furthermore, the solution based fabrication method also has the potential in the flexible memory application due to the merit of the low-temperature process.

Resistive switching behavior of photochemical activation solution-processed thin films at low temperatures for flexible memristor applications

Resistive switching in Nb-doped SrZrO3 memory films: An effective approach with a Cu modulation layer

Reversible Transition of Volatile to Non-Volatile Resistive Switching in Cu/SiNx/ZnO/Pt Memristor

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Stable Resistive Switching in ZnO/PVA:MoS<sub>2</sub> Bilayer Memristor

Stable Resistive Switching in ZnO/PVA:MoS2 Bilayer Memristor

In-Depth Physical Mechanism Analysis and Wearable Applications of HfO x-Based Flexible Memristors

Enhanced Resistive Switching Performance of Aluminum Oxide Dielectric with a Low Temperature Solution-Processed Method

Resistive Switching and Synaptic Behaviors of Tan/Al2o3/Zno/Ito Flexible Devices with Embedded Ag Nanoparticles

Transparent HfO x -based memristor with robust flexibility and synapse characteristics by interfacial control of oxygen vacancies movement

Analog-type resistive switching behavior of Au/HfO2/ZnO memristor fabricated on flexible Mica substrate

Flexible memristors with low-operation voltage and high bending stability based on Cu2AgBiI6 perovskite

Nonvolatile resistive memory and synaptic learning using hybrid flexible memristor based on combustion synthesized Mn-ZnO

Solution-processed Small-Molecular Organic Memristor with a Very Low Resistive Switching Set Voltage of 0.38 V

Resistive Switching Modification by Ultraviolet Illumination in Transparent Electrode Resistive Random Access Memory

Fabrication of High Quality Lead-free Double Perovskite Cs2AgBiBr6 Thin Film and its Application in Memristor with Ultralow Operation Voltage

Resistive Switching of Hfo2 Based Flexible Memories Fabricated by Low Temperature Atomic Layer Deposition

Optically Mediated Nonvolatile Resistive Memory Device Based on Metal-Organic Frameworks

High Performance Full-Inorganic Flexible Memristor with Combined Resistance-Switching

Resistive switching modulation by incorporating thermally enhanced layer in HfO2-based memristor

High performance, electroforming-free, thin film memristors using ionic Na 0.5 Bi 0.5 TiO 3