Abstract:Transparent conductive films are important components of organic optoelectronic devices. However, current organic light-emitting devices (OLEDs) used in flexible wearable applications are severely restricted by the fragility and poor conductivity of composing ultra-thin electrodes. In this study, poly(methyl methacrylate) (PMMA)/trimethylaluminum (TMA) was prepared through an atomic layer half-reaction and used as a self-encapsulating nucleation layer. The study suggested coordination between the Au atoms with the functional methyl groups of PMMA/TMA to yield an entire substrate surface. The Au nuclei were evenly and densely distributed on the substrate surface, and island growth of Au film was prevented, leading to good flexibility and photoelectric properties of the Au film deposited on the nucleation layer. For instance, a 7 nm thick layer resulted in a sheet resistance of 18.19 ± 0.44 Ω/◻ at 85.89% transmittance. Furthermore, the use of the as-obtained high-performance electrode in flexible organic optoelectronic devices led to repeated bending over 1000 cycles to a radius of 1 mm without significant reduction in the optoelectronic performances. The nucleation induction layer could also function as a bottom encapsulation with a water vapor transmission rate as low as 2.123 × 10<sup>−3</sup> g/cm<sup>2</sup>/day (60 °C/80% relative humidity). Additionally, the nucleation induction layer exhibited excellent performances in fully transparent devices (75.72% transmittance). In sum, these findings look promising for future flexible wearable applications.

High-luminance Flexible Top Emission Organic Light Emitting Diode with Nickel-Chromium Alloy Thin Film on Aluminum Anode

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

Enhancing Hole-Injection Efficiency of Top-Emitting Organic Light-Emitting Diodes Based on Al/MoNx Anodes

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Pure Aluminum As the Anode in Top Emission Oled

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Enhanced Hole Injection Characteristics of a Top Emission Organic Light-Emitting Diode with Pure Aluminum Anode

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

Improved Light Outcoupling For Top-Emitting Organic Light-Emitting Devices

Efficient Top-Emitting Polymer Light-Emitting Diodes Using Chromium As Anode

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

High-efficiency top-emitting organic light-emitting diodes based on metal/ITO composite electrodes

Nanoscale control of doped organic hole-injection layer in thermally annealed top emission organic light emitting diode

Highly Flexible and Efficient Top-Emitting Organic Light-Emitting Devices with Ultrasmooth Ag Anode

Bipolar TADF Interlayer for High Performance Hybrid WOLEDs with an Ultrathin Non-Doped Emissive Layer Architecture

Tri-Metal Layered Semitransparent Electrode for Red Phosphorescent Organic Light-Emitting Diodes

Fabrication of nucleation induction layer of self-encapsulated metal anode by an atomic layer half-reaction for enhanced flexible OLEDs

A highly transparent laminated composite cathode for organic light-emitting diodes

High Efficiency Top-Emitting White Organic Light-Emitting Devices With A (Metal/Organic)(2) Cathode

High-Performance Top-Emitting White Organic Light-Emitting Devices

Ultra-Smooth and Efficient NiO/Ag/NiO Transparent Electrodes for Flexible Organic Light-Emitting Devices