Abstract:Efficient white-light-emitting diodes (WPLEDs) based on a polymer codoped with two phosphorescent dyes were fabricated by the spin-casting method. Polyhedral oligomeric silsesquioxane-terminated poly(9,9-dioctylfluorene) (PFO-poss) was used as the host and blue light emitter. Phosphorescent emitters, fac-tris[2-(4(')-ter-butyl)phenylpyridine] iridium (III) [Ir(Bu-ppy)(3)] and bis-(1-phenylisoquinolyl)iridium(III)(1-trifluoro) acetylacetonate [(Piq)(2)Ir(acaF)] with green and red emission, respectively, were used as the guests. The electroluminescence spectrum can be tuned by changing concentration of the guests. The structure of the WPLEDs is indium tin oxide (ITO)/poly(ethlenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS)/ PVK/PFO-poss codoped with Ir(Bu-ppy)(3) and (Piq)(2)Ir(acaF)/Ba/Al. The PVK layer [poly(N-vinylcarbazole)] acts as the function of blocking electron penetrating from PFO-poss to PEDOT. When the doping concentrations are 0.14 wt % for both Ir(Bu-ppy)(3) and (Piq)(2)Ir(acaF), the efficient white-light emission with CIE coordinates of around (0.33, 0.33) is achieved. The current efficiency reaches 5.5 lm/W (9 cd/A), and the maximum luminance of 10 200 cd/m(2) was gained at 11 V. The mechanisms of the WPLEDs with high efficiency are discussed. (C) 2005 American Institute of Physics.

Efficient Top-Emitting Polymer Light-Emitting Diodes Using Chromium As Anode

Efficient Red Phosphorescence Polymer Light-Emitting Diodes with Dual Function Polymer

Utilization of Water/Alcohol-Soluble Polyelectrolyte As an Electron Injection Layer for Fabrication of High-Efficiency Multilayer Saturated Red-Phosphorescence Polymer Light-Emitting Diodes by Solution Processing

Efficient Light-Emitting Diodes Based on Nanocrystalline Perovskite in A Dielectric Polymer Matrix

Robust Laminated Anode with an Ultrathin Titanium Nitride Layer for High-Efficiency Top-Emitting Organic Light-Emitting Diodes

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

High-luminance Flexible Top Emission Organic Light Emitting Diode with Nickel-Chromium Alloy Thin Film on Aluminum Anode

High Efficiency Polymer Electrophosphorescent Light-Emitting Diodes

Improved Performance by Modification of Cathode in Polymer Light-Emitting Diode Based on A Novel Se-Containing Electroluminescent Copolymer

High-efficiency Inverted Top-Emitting Polymer Light-Emitting Diodes

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

Fabrication of highly efficient blue top-emission organic light-emitting diodes on different reflective electrodes

Efficient top-emitting white organic light emitting device with an extremely stable chromaticity and viewing-angle

Highly Efficient Red Light-Emitting Devices Using Copolymer Containing Charged Iridium Complex in the Side Chain

Highly Efficient Top-Emitting Organic Light-Emitting Devices with Aluminium Electrodes

Efficient multilayer electrophosphorescence white polymer light-emitting diodes with aluminum cathodes

Polymer Light-Emitting Diodes with Novel Environment-Friendly Alcohol-Soluble Conjugated Copolymer

High Brightness Fluorescent White Polymer Light-Emitting Diodes by Promoted Hole Injection via Reduced Barrier by Interfacial Dipole Imparted from Chlorinated Indium Tin Oxide to the Hole Injection Layer PEDOT:PSS.

Efficient White-Light-Emitting Diodes Based On Polymer Codoped With Two Phosphorescent Dyes

Performance of Polymer Light-Emitting Diodes with Saturated Red-Emitting Poly(fluorine-Co-4,7-dithien-2-yl-2,1,3-benzothiadiazole-carbazole or Triphenylamine)

Improved performance of polymer light-emitting diodes using graphene oxide doped with silver nanoparticles as the hole-transport layer