Abstract:A Si(220) double-crystal monochromator for the energy range 10–30 keV is presented. It will be used for EXAFS as well as powder diffraction measurements. To determine the requirements for this monochromator we looked, apart from mean considerations, at the requirements dictated by EXAFS in transmission mode. For good data analyses the proper shape, amplitude, and location at the energy axis of each wiggle is required. Moreover it is essential to separate the wiggles from background and noise. For the latter a high flux through the sample is desirable, which can be achieved by horizontal focusing of the beam. For that we have chosen to bend the second crystal sagitally. The sagittal bending radius is adjustable between 50 and 0.8 m, because for different energies different sagittal radii are necessary to focus the beam on the sample. The mean meridional radius of the second crystal is fixed at 130 m, which is an optimization for 20 keV. The meridional radius of the first crystal can be tuned between 100 and 500 m. When this radius is set to 130 m the energy resolution is calculated to be 6, 3, and 35 eV for 10, 20, and 30 keV (for perfectly bent crystals). By changing the meridional radius of the first crystal, future users of this monochromator can make the trade off between resolution and intensity. Movement of the monochromator exit beam, during a scan, will occur due to the monochromator geometry, but is reduced as much as possible by using an asymmetrically cut second crystal, with an asymmetry angle of 2.5°. The average exit beam movement of the monochromator for a 1-keV scan is 20 μm. For 40% of the energy range (10–30 keV) the exit beam position remains within 10 μm. For the second crystal no translation stage is used. When using a translation stage it is difficult to keep the change in flux within acceptable limits, because an alignment error of 0.01 arcsec at 30 keV will result in a change in intensity of 1%.

A Cryogenically Cooled Channel-Cut Crystal Monochromator Using a Helium Refrigerator and Heat Exchanger

A thermal deformation optimization method for cryogenically cooled silicon crystal monochromators under high heat load

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

The Clinical Significance of Posterior Insular Volume in Adolescent Anorexia Nervosa

Modelling the power threshold and optimum thermal deformation of indirectly liquid‐nitrogen cryo‐cooled Si monochromators

Diamond Channel-Cut Crystals for High-Heat-Load, Beam-Multiplexing, Narrow-Band X-ray Monochromators

A dynamic focusing x‐ray monochromator for a wiggler beam line at the SRS of the SERC Daresbury Laboratory (abstract)

A System for Doing Low Temperature-High Pressure Single Crystal X-ray Diffraction with a Synchrotron Source

Development of a cryocooler conduction-cooled 650 MHz SRF cavity operating at ~10 MV/m cw accelerating gradient

Design and realization of a 3-K cryostat for a 10-cm ultrastable silicon cavity

Theoretical considerations on the design of three-beam X-ray monochromators for synchrotron radiation

A Laboratory-based Hard X-ray Monochromator for High-Resolution X-ray Emission Spectroscopy and X-ray Absorption Near Edge Structure Measurements

Development of a new state-of-the-art beamline optimized for monochromatic single-crystal and powder X-ray diffraction under extreme conditions at the ESRF

Single pulse data collection with an X-ray chopper at in situ room temperature Laue crystallography beamline BL03HB

Measurement of the thermal accommodation coefficient of helium on a crystalline silicon surface at low-temperatures

Monochromator development at 4W1B beamline of BSRF

High-resolution Interference-Monochromator for Hard X-rays.

Precision control of thermal transport in cryogenic single-crystal silicon devices

Towards a sub-kelvin cryogenic Fabry-Perot silicon cavity

Diffraction imaging for in-situ characterization of double-crystal x-ray monochromators

Development of a superconducting undulator cryostat based on the thermosiphon effect