Abstract:A Si(220) double-crystal monochromator for the energy range 10–30 keV is presented. It will be used for EXAFS as well as powder diffraction measurements. To determine the requirements for this monochromator we looked, apart from mean considerations, at the requirements dictated by EXAFS in transmission mode. For good data analyses the proper shape, amplitude, and location at the energy axis of each wiggle is required. Moreover it is essential to separate the wiggles from background and noise. For the latter a high flux through the sample is desirable, which can be achieved by horizontal focusing of the beam. For that we have chosen to bend the second crystal sagitally. The sagittal bending radius is adjustable between 50 and 0.8 m, because for different energies different sagittal radii are necessary to focus the beam on the sample. The mean meridional radius of the second crystal is fixed at 130 m, which is an optimization for 20 keV. The meridional radius of the first crystal can be tuned between 100 and 500 m. When this radius is set to 130 m the energy resolution is calculated to be 6, 3, and 35 eV for 10, 20, and 30 keV (for perfectly bent crystals). By changing the meridional radius of the first crystal, future users of this monochromator can make the trade off between resolution and intensity. Movement of the monochromator exit beam, during a scan, will occur due to the monochromator geometry, but is reduced as much as possible by using an asymmetrically cut second crystal, with an asymmetry angle of 2.5°. The average exit beam movement of the monochromator for a 1-keV scan is 20 μm. For 40% of the energy range (10–30 keV) the exit beam position remains within 10 μm. For the second crystal no translation stage is used. When using a translation stage it is difficult to keep the change in flux within acceptable limits, because an alignment error of 0.01 arcsec at 30 keV will result in a change in intensity of 1%.

A thermal deformation optimization method for cryogenically cooled silicon crystal monochromators under high heat load

Thermal deformation of cryogenically cooled silicon crystals under intense X-ray beams: measurement and finite-element predictions of the surface shape

Modelling the power threshold and optimum thermal deformation of indirectly liquid‐nitrogen cryo‐cooled Si monochromators

Advanced ice lithography system using a micro-machined Joule-Thomson cooler

Model Optimization of Infrared Homogenization for Inertial Confinement Fusion Cryotargets

Thermal optimization of a high heat load liquid-metal-bath cooled mirror at the Hefei Advanced Light Facility

Optimization of the Thermal Field of 8-Inch SiC Crystal Growth by PVT Method with “3 Separation Heater Method”

Diffraction imaging for in-situ characterization of double-crystal x-ray monochromators

Diamond Channel-Cut Crystals for High-Heat-Load, Beam-Multiplexing, Narrow-Band X-ray Monochromators

Multi‐segment cooling design of a reflection mirror based on the finite‐element method

Theoretical considerations on the design of three-beam X-ray monochromators for synchrotron radiation

Thermal loading on crystals in an X-ray free-electron laser oscillator

Optimization of the Cooling Profile to Achieve Crack-Free Yb:S-FAP Crystals

Precision control of thermal transport in cryogenic single-crystal silicon devices

A study of enhancing the power of a CW Ti:sapphire laser by cryogenic cooling

Optimal Cooling System Design for Increasing the Crystal Growth Rate of Single-Crystal Silicon Ingots in the Czochralski Process Using the Crystal Growth Simulation

Double-edge scan wavefront metrology and its application in crystal diffraction wavefront measurements

A dynamic focusing x‐ray monochromator for a wiggler beam line at the SRS of the SERC Daresbury Laboratory (abstract)

Design and realization of a 3-K cryostat for a 10-cm ultrastable silicon cavity

Integrated optical design method for the synchrotron radiation beamlines

Optimizing the slicing pattern of stress‐relief crystal analyzers for X‐ray Raman scattering