Abstract:Large volume cubic press is one of the most popular high pressure devices which can produce pressures up to about 7 GPa. It is well known experimentally that the enhancing of the maximum pressure generated in the large volume cubic press has attracted wide attention among scientists and engineers because the higher pressure is capable of synthesizing some materials with interesting properties. In the large volume cubic press, pyrophyllite is typically used as a pressure-transmitting medium. A specimen immersed in such a solid experiences a generalized stress state. The pressure distribution in pyrophyllite is an important parameter for characterizing the sample environment and designing the experiments at high pressure. There is a need for the quantitative measurement of pressure gradients in the pyrophyllite pressure medium, so that the accurate experimental data under high pressure can be obtained. In the large volume cubic apparatus (68 MN), we put a circuit into the high pressure cubic cell, so that the pressures at various positions can be measured by using the phase transitions in Bi, Tl and Ba. In the present work, the relationship between the total press load and the press load allocated to the anvil face, and the relationship between the total press load and the press load allocated to gaskets are established at room temperature. The results show that with the increase of the total press load, the load allocated to the gaskets is increased sharply, while the curve of load allocated to the anvil face versus total press load reaches a plateau, which results in the cell pressure reaching upper limit when the cell pressure reaches up to about 5 GPa. According to the experimental results, the stress state of the cubic cell under high pressure is analyzed and the reason why the pressure generated in the large volume cubic chamber is difficult to exceed 7 GPa is explained. Based on the geometrical structure of the cubic cell, the scheme to increase the upper pressure limit for cubic cell by using the material with high bulk modulus as the pressure transmitting medium and the material with low bulk modulus as the gasket, is proposed. Additionally, the method of calculating the pressure values at different positions along the axis of symmetry in the cubic cell is given through the quantitative calibration of the pressure gradient in the axial direction of the cubic cell. This method can provide more accurate pressure data for high pressure experiments.

A technique for thermoelectric power measurements at high pressure in an octahedral multianvil press

Ultrasonic-assisted Hot Pressing of Bi2Te3-based Thermoelectric Materials

ChemInform Abstract: High Pressure in Situ Differential Thermal Analysis of Na0.5Bi0.5TiO3 Phase Transitions Up to 5 GPa.

High Pressure in Situ Differential Thermal Analysis of Na0.5Bi0.5TiO3 Phase Transitions Up to 5 GPa

Microstructure and thermoelectric properties of porous Bi 2 Te 2.85 Se 0.15 bulk materials fabricated by semisolid powder processing

Force Analysis and Pressure Quantitative Measurement for the High Pressure Cubic Cell

Improving thermoelectric properties of Bi2Te3 by straining under high pressure: Experiment and DFT calculation

Study on the properties of Ca9Co12O28 under high pressure

High-pressure induces topology boosting thermoelectric performance of Bi2Te3

Thermal Equations of State and Phase Relation of PbTiO3: A High P-T Synchrotron X-Ray Diffraction Study

In situ synchrotron X-ray diffraction with laser-heated diamond anvil cells study of Pt up to 95 GPa and 3150 K

New Methods for Investigating Superconductivity at Very High Pressures

Ab initio study of the mechanical properties and thermal conductivity of Bi2O2X (X = Se, Te) under pressure

High Pressure Drives Microstructure Modification and zT Enhancement in Bismuth Telluride-Based Alloys

Strategies and challenges of high-pressure methods applied to thermoelectric materials

Quantification of electron–phonon interaction in bismuth telluride under hydrostatic pressure via ultrafast spectroscopy

Data-driven Exploration of New Pressure-induced Superconductivity in PbBi$_2$Te$_4$ with Two Transition Temperatures

New apparatus for DTA at 2000 bar: thermodynamic studies on Au, Ag, Al and HTSC oxides

Effect of Starting Powder Particle Size on the Thermoelectric Properties of Hot-Pressed Bi0.3Sb1.7Te3 Alloys

High-Temperature Mechanical and Thermoelectric Properties of p-Type Bi0.5Sb1.5Te3 Commercial Zone Melting Ingots

Optimization of the Consolidation Parameters for Enhanced Thermoelectric Properties of Gr-Bi2Te2.55Se0.45 Nanocomposites