Abstract:High-entropy ceramics (HECs) become a focus as an innovative design of refractory materials due to their exclusive microstructure, huge adjustable components, some superior properties, and potential applications. Generally, they are manufactured by solid-state synthesis. However, in this paper, (Nb0.25Mo0.25Ta0.25W0.25)C (HEC-1) and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C (HEC-2) high-entropy carbide ceramics were successfully fabricated through vacuum arc melting using transition metal carbides powders. X-ray diffraction, energy dispersive spectrometer and scanning electron microscope were performed to analyze the phase evolution and microstructure uniformity. The experimental data exhibited that the as-prepared HEC-1 and HEC-2 formed into a single-phase body-centered cubic (BCC) structure. HEC-1 revealed a high compositional uniformity at microscale, while a segregation of molybdenum element was observed in HEC-2. Vickers hardness test results showed that HEC-1 presented a great microhardness of 23.13 GPa at 0.98 N, which was higher than the highest hardness of the individual binary carbides. The significantly enhanced hardness could be attributed to the solid solution strengthening effect. HEC-2 exhibited a good combination of high microhardness and fracture toughness due to the doping of Hf. These broaden the potential applications of HECs towards, such as protective coatings, high temperature structure parts, and machining tools. This study provides a new approach to prepare bulk HECs, and the tuning in toughness by exploring a novel intricated compositions would be of great significance for the further development.

Microstructure and Mechanical Properties of In-Situ MC-carbide Particulates-Reinforced Refractory High-Entropy Mo0.5NbHf0.5ZrTi Matrix Alloy Composite

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Microstructure and mechanical properties of in-situ nitride-reinforced refractory high-entropy alloy TiZrHfNbTa matrix composites

Microstructure and mechanical properties of multi-phase reinforced Hf-Mo-Nb-Ti-Zr refractory high-entropy alloys

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles

Microstructure and Mechanical Properties of Refractory MoNbHfZrTi High-Entropy Alloy

Microstructure Characteristics and Mechanical Properties of Hf0.5Mo0.5NbTiZr Refractory High Entropy Alloy with Cr Addition

Microstructure and Mechanical Properties of Refractory High Entropy (mo0.5nbhf0.5zrti)bcc/m5si3 In-Situ Compound

Sub-micron grains and excellent mechanical properties of low-density Ti40Nb30Mo30-C refractory complex concentrated alloy reinforced with in-situ (Ti, Nb)C

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Microstructure evolution and high temperature wear resistance of in-situ synthesized carbides reinforced NiCoFeCrSiMo high entropy alloy coatings fabricated by laser cladding

High-temperature Mechanical Properties and Dynamic Recrystallization Mechanism of in situ Silicide-reinforced MoNbTaTiVSi Refractory High-entropy Alloy Composite

Influence of alumina whisker or nano-carbon contents on the microstructure and mechanical properties of CuZrTiAlNi refractory high entropy alloy composites

Investigation of Multi-Phase Intermetallic Matrix Composites (IMC) Based on Al–Mo–Zr–Co System

High-entropy M2AlC-MC (M=Ti, Zr, Hf, Nb, Ta) Composite: Synthesis and Microstructures

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites

Microstructure and mechanical properties of MoNbW(TaC)x composites

Microstructure and mechanical properties of textured high‐entropy M4AlC3/Al2O3 (M = Ti, V, Mo, Nb, Ta) composites

Microstructure, Mechanical and Tribological Properties of High-Entropy Carbide (MoNbTaTiV)C5

Microstructure and mechanical properties of Re0.5MoNbWTaC0.8 high-entropy composite