Abstract:The solidification behaviours and microstructural characteristics of both ZA27/SiCp composites and monolithic ZA27 alloy were studied by using differential scanning calorimetry, scanning electron microscopy, transmission electron microscopy, electron probe microanalysis, and X-ray diffraction, It was found that there were differences in the transformation temperature and volume fraction of the phases, although the solidification process was almost identical for the composite and the monolithic alloy. The incorporation of SiC particles in the ZA27 alloy led to slight refinement of primary grains and reduced volume fraction of eutectic-like phase. The SiC particles obstructed Zn diffusion in the residual melt during the formation of proeutectic beta phase, but promoted Zn diffusion from alpha (Al) to eta (Zn) phase during eutectoid transformation. During solidification, Cu was mainly segregated in the final solidification regions; Mg was present not only in the matrix but also on SiC particles; and oxide inclusions were mainly distributed around SiC particles, The matrix microstructure for both materials mainly consisted of primary cores of Al rich alpha + eta eutectoid; beta' phase resulting from the eutectoid transformation of the proeutectic beta phase; and Zn rich alpha + eta eutectoid resulting from the eutectoid transformation of the eutectic-like phase. The SiC particles were mainly distributed around the primary grains, Several new phases based on the Al-Zn-Mg-Cu system and interfacial reaction products, including Al21Fe3Si, Cu5Zn8, Mg6Cu3Al7, MgAl2O4, and amorphous oxide inclusions, were identified in the final solidification regions. The nucleation of both primary alpha phase and eutectic-like alpha + eta phase at the surface of SIC particles and their crystallographic orientation relationships were investigated theoretically and experimentally. No distinct crystallographic orientation relationship between the matrix and SiC has been identified, although the mismatch between (0001)(SiC) and (111)(alpha) was calculated to be as small as 7.6%.

Investigation of Multi-Phase Intermetallic Matrix Composites (IMC) Based on Al–Mo–Zr–Co System

Multi-phase Aluminide-Based Composites – Fabrication, Microstructure and Properties

Processing and Mechanical Properties of Multiphase Composites Based on Mo–Si–Al–C System

Microstructure and Mechanical Properties of In-Situ MC-carbide Particulates-Reinforced Refractory High-Entropy Mo0.5NbHf0.5ZrTi Matrix Alloy Composite

Microstructural Characteristics and Mechanical Behavior of SiC(CNT)/Al Multiphase Interfacial Micro-Zones Via Molecular Dynamics Simulations

Metal-matrix interpenetrating phase composite and its in situ fracture observation

Effect of Al<sub>2</sub>O<sub>3</sub> particle size on the microstructure, phase transformation and mechanical properties of hot pressed Al<sub>2</sub>O<sub>3</sub>-CA6-ZrO<sub>2</sub>/Ni multi-phase composites

In–situ synthesis of an Al composite reinforced with multi–scale Al12Mo, (Al, Zr, Si) and Al2O3 particles through a multi–stage reaction

Solidification and microstructure of ZA27/SiCp composite fabricated by mechanical-electromagnetic combination stirring process

Microstructure and Mechanical Properties of Hot-Pressed Al2O3–mullite–ZrO2–SiC Composites

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB2 co-reinforced Al-Zn-Mg-Cu composites

Microstructure and properties of a HIP manufactured SiC p reinforced high alloyed Al–Zn–Mg–Cu–Zr–Ti aluminum matrix composite

Microstructure evolution and mechanical properties strengthening in laser powder bed fusion of high-strength SiC and TiB 2 co-reinforced Al-Zn-Mg-Cu composites

The Microstructure and Mechanical Property of Mo(Si, Al)2-SiC Composite Prepared by Infiltrating Melt Aluminum

Microstructure and mechanical properties of an aluminum alloy reinforced by Al–Ni–Co–Mn quasi-crystalline

Reaction synthesis, microstructure, and mechanical properties of in-situ TiAl-based multiphase composites

Microstructure and Mechanical Properties of an Al–Ni–Co Intermetallics Reinforced Al Matrix Composite

Microstructure Evaluation, Quantitative Phase Analysis, Strengthening Mechanism and Influence of Hybrid Reinforcements (β-SiCp, Bi and Sb) on the Collective Mechanical Properties of the AZ91 Magnesium Matrix

Microstructures and mechanical properties of aluminum matrix composites fabricated from Al-x wt.% Zr(CO3)2 (x = 5, 10, 15, 20, 25) systems

Synthesis and Characterization of In Situ Dendritic/Particulate α-Al(Fe,TM)Si Phase Reinforced Al Matrix Composites

Mechanical Properties and Fracture Mechanisms of Aluminum Matrix Composites Reinforced by Al-9(Co, Ni)(2) Intermetallics