Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The present-day structural application requires advanced materials at extreme conditions, and the development of it is not economically feasible. As a result, existing material in the composite form has more visibility to suit the purpose. The material's strengths and qualities must be examined before it can be recommended for use in harsh conditions. In the present study, Al2O3 (3, 6, 9, 12, and 15 wt.%) and ZrO2 particles (2 wt.%) are reinforced with Al-Mg-Si alloy (Al 6061), which possess good isotropic behaviour and better interface bonding. The double stir casting process was adopted for the hybrid composite development, and the samples were cold rolled to reduce grain size and pores in the composites. The developed composites were subjected to mechanical characterisation tests such as hardness, tensile, compression, impact and flexural tests. An increase in reinforcement percentage enhances the mechanical properties. The improvement was attributed to the high thermal mismatch and reduction in the inter-particle distance by cold rolling and the reinforcements. Scanning electron microscope microstructural examination was conducted, and even dispersion of 3 to 15 wt.% Al2O3 reinforcements was observed. Tensile elongation decreases with an increase in reinforcement percentage. High elastic modulus and temperature mismatch between matrix and reinforcements increase the strength of the composites. The fracture behaviour of the composites generally showed dimples which are characteristics of ductile fracture, except at 15 wt.% Al2O3 / 2 wt.% ZrO2 showed a large portion of cleavage planes and grain cracking. The Al-Mg-Si alloy is reinforced with 9 wt%. Al2O3 / 2 wt.% ZrO2 had the best properties suitable for its use in different structural applications.

Microstructures and mechanical properties of aluminum matrix composites fabricated from Al-x wt.% Zr(CO3)2 (x = 5, 10, 15, 20, 25) systems

The Microstructure and Mechanical Properties of As-cast Mg-10Gd-3Y-xZn-0.6Zr (x=0, 0.5, 1 and 2 Wt%) Alloys

Microstructures and Dry Sliding Wear Properties of in Situ (al3zr+zrb2)/al Composites

Fabrication and Dry Sliding Wear Behavior of in Situ Al–K2ZrF6–KBF4 Composites Reinforced by Al3Zr and ZrB2 Particles

Microstructures and Mechanical Properties of Ultralight Cast Al-3Li-XMg-0.1Zr Alloys

Influence of Al Content on the Microstructure and Mechanical Property of the (zr2cu)100−xalx Alloys

Microstructures and mechanical properties of the in-situ formed nanocomposites of (ZrB2 + Al2O3) and AA7055 alloy

Aluminum Matrix Composites Reinforced by in Situ Al2O3 and Al3Zr Particles Fabricated Via Magnetochemistry Reaction

Microstructure and mechanical properties of Zr–Co–Al alloys prepared by rapid solidification

Microstructure and Properties of a Nano-Zro2-reinforced AlSi10Mg Matrix Composite Prepared by Selective Laser Melting

Influence of Zr content on microstructure and mechanical properties of As-cast Al-Zn-Mg-Cu alloy

Microstructure and mechanical properties of Zn based composites reinforced by Ti3AlC2

Mechanical and Wear Behavior of Al-Si5Cu3/ZrB2 In-Situ Reinforced Metal Matrix Composite

Experimental investigation on the mechanical performance of the Al2O3 and ZrO2 added Al-Mg-Si alloy for structural applications

Solidification Microstructure and Property of Al3Zr(p)，Al2O3(p)/A356 Composites Fabricated by Reaction in Melt

Effect of Al Content on the Microstructure and Tensile Properties of Zr-Co-Al Alloy Prepared by Rapid Solidification

High-Temperature Mechanical Properties of Aluminum Alloy Matrix Composites Reinforced with Zr and Ni Trialumnides Synthesized by In Situ Reaction

Influence of Zr Microalloying on the Microstructure and Room-/High-Temperature Mechanical Properties of an Al–Cu–Mn–Fe Alloy

Mechanical and Wear Properties of Al<sub>2</sub>O<sub>3</sub>-15wt%ZrO<sub>2</sub> Composites

Enhanced microstructure and mechanical properties of ZrN-reinforced AlSi10Mg aluminum matrix composite

Insight into the Microstructure Configuration and Strengthening Mechanisms of a Cast In-Situ Al3Zr Reinforced Al–Li Matrix Composite