Abstract:We developed a new platform that enables in-situ four-probe electronic measurements, in-situ three-probe field-effect measurements, nanomanipulation, and in-situ modification of nanodevices inside a transmission electron microscope (TEM). The platform includes a specially designed chip-holder and a silicon (Si) chip with suspended metal electrodes. The chip-holder can hold one Si chip with a size up to 3 mm x 3 mm and provides four electrical connections that can be connected to the micrometer-sized electrodes on the Si chip by wire-bonding. The other side of the electrical connections on the chip-holder is connected to the electronic instruments outside the TEM through a commercial Nanofactory SPM-TEM holder. The Si chip with suspended metal electrodes on one of its edges was fabricated by lithography and wet etching. Carbon nanotubes (CNTs), InAs nanowires, and tungsten disulfide nanowires were placed to stride over and connect to the suspended electrodes on the Si chip by nanomanipulations inside a scanning electron microscope (SEM). By using the platform, I-V curves of an individual single-walled CNT connecting to four electrodes were in-situ measured between any two of the four suspended electrodes, and a high-resolution TEM image of the same CNT was obtained. Furthermore, four-terminal I-V measurement on an InAs nanowire was achieved on this platform, and with a movable probe used as a gate electrode, field-effect measurement on the same InAs nanowire device was accomplished in SEM. In addition, by using the movable probe on the SPM-TEM holder, we could further in-situ modify nanomaterial and nanodevices. The present work demonstrates a method that allows a direct correlation between the atomic-level structure and the electronic property of nanomaterials or nanodevices whose structure can be further modified in-situ.

Characterization of Semiconductor Surface Conductivity by Using Microscopic Four-Point Probe Technique

Fabrication of a microscopic four-point probe and its application to local conductivity measurement

Development of a New Microscopic Four-Point AFM Probe for the Measurement of Local Electrical Conductivity

Microscopic Four-Point Atomic Force Microscope Probe Technique for Local Electrical Conductivity Measurement

G030083 Four-point Atomic Force Microscope Probe for Imaging the Electrica1 Characteristics of Materials

Development of Micro-Four-point Probe in a Scanning Tunneling Microscope for in Situ Electrical Transport Measurement.

Measurement of Local Electrical Conductivity by Four-Point Probe Atomic Force Microscope Technique

NOVEL AFM PROBE FOR LOCAL CONDUCTIVITY MEASUREMENT

Polished nanopipets: new probes for high-resolution scanning electrochemical microscopy.

Methodology for Measurement of Submicron Metallic Wire's Local Electrical Conductivity by Applying Four-points AFM Probe Technique

Method for Accurate Measurement of Micro-Nano Thin Film Device Resistivity

Profile Measurements of Micro-Aspheric Surfaces Using an Air-Bearing Stylus with A Microprobe

Development and Performance of the Nanoworkbench: A Four Tip STM for Electrical Conductivity Measurements Down to Sub-micrometer Scales

Performing Probe Experiments in the Sem

A dual-probe three-dimensional profile measurement system

Silicon probe for micromachined surface profilers

A platform for in-situ multi-probe electronic measurements and modification of nanodevices inside a transmission electron microscope.

Near-Field Optical Scanning Probe Based on Surface Plasmon Resonance

Electrical Resistivity Measurements of Surface-Coated Copper Foils

Micro/nano Scale Mechanical Tests Based on the Probe Platform

Sub-micrometer four-point probe transport measurements on graphene