Abstract:In this article, the nano-MgO particles were used as inorganic fillers, and polypropylene (PP) polymer was used as a matrix. The nano-MgO/PP composites were prepared by double melt blending. Using the polarization microscope (PLM) test and hot-stage microscope test, the crystalline morphology of PP and nano-MgO/PP with different mass fraction were observed. Using the differential scanning calorimetry (DSC) test, the parameters and crystallinity in the process of isothermal crystallization could be obtained. Additionally, the samples of pure PP and nano-MgO/PP composites were dealt with using a breakdown test and a dielectric frequency spectra test. From the experimental results, nano-MgO particle doping decreased the samples’ crystal size, and the crystalline structure was converted from large spherulites to fascicled crystallization. Additionally, the crystallization rate became fast and crystallinity increased. According to the breakdown test, the nano-MgO particle doping made the composites form small, dense spherulites. The breakdown developed through a longer path, so the composites’ breakdown strength rose greatly. When the mass fraction of nano-MgO particles was 3%, the shape parameter of the composites’ Weibull distribution β was larger, which illustrated that the nano-MgO particles were dispersed uniformly in the PP matrix. According to the dielectric frequency spectra test, the dielectric constant of different nanocomposites were all lower than which of pure PP, but the loss angle tangent values were all higher than which of pure PP.

Morphology and mechanical properties of PP/POE/nano‐CaCO3 composites

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Studies of the Toughness and Reinforcement of PP/Magnesium Hydrate Whisker/POE Composites

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Effects of Carbon Black Content on Microwave Absorbing and Mechanical Properties of Linear Low Density Polyethylene/Ethylene-Octene Copolymer/Calcium Carbonate Composites

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Mechanical Properties and Morphology of Poly(L-Lactic Acid)/Nano-Caco3 Composites

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

The Influence of Calcium Carbonate on the Mechanical Properties and Phase Morphology of PA6/PP Blend

Study on the Properties and Structure of Polypropylene Modified with Nano-Sized CaCO_3

Electrical Resistivity, Crystallization and Mechanical Properties of Polypropylene/Multi-Walled Carbon Nanotube/Calcium Carbonate Composites Prepared by Melt Mixing

Experimental investigation on mechanical properties of nanocomposites based on poly lactic acid/ polyolefin elastomer reinforced with multi-walled carbon nanotubes, and graphene nanoplatelets

Calcium Carbonate Particles Filled Homopolymer Polypropylene at Different Loading Levels: Mechanical Properties Characterization and Materials Failure Analysis

Effect of Nano-MgO Particles Doping on Breakdown Characteristics of Polypropylene

Exploring the Effects of Nano-CaCO3 on the Core–Shell Structure and Properties of HDPE/POE/Nano-CaCO3 Ternary Nanocomposites

Study on the Preparation and Properties of Caco3/Polypropylene Composite Materials

Influence of polypropylene fibers on the tensile mechanical properties of calcium silicate hydrate: molecular simulation