Abstract:The influence of PLA on the morphology and mechanical performance of PA6/ABS blends. In this research, the morphology, rheology, and mechanical performance of polyamide 6/polylactic acid/acrylonitrile–butadiene–styrene (PA6/ABS/PLA) ternary blends were studied. The optimum ABS percentage in PA6/ABS binary blend to achieve highly toughened blend was determined around 35 wt.%. The spreading coefficient (Sij) predictions showed that each of PLA and ABS can form separate phase in the PA6 matrix. The evaluation of the interfacial interactions in the ternary blends revealed a higher tendency of PLA to interact with PA6 chains (Sij:−1.20) rather than ABS (Sij:−0.20) which is in comply with higher work of adhesion of PLA/PA6 than PLA/ABS and PA6/ABS. By adding PLA to the binary blends of PA6/ABS, it was found that the ABS domain size decreased due to rheological change. The localization of each component in the ternary blends observed in SEM analysis was in agreement with spreading coefficient predictions. Morphological evaluations revealed higher interfacial interactions between PA6 and PLA in the blends with up to 20 wt.% PLA. The optimized blend ratio of ternary blends showed higher complex viscosity at low shear rates and higher values than the mixing rule prediction. The optimum flexural modulus of 2 GPa and impact resistance of 47 kJ/m2 were achieved at 20 wt.% PLA in PA6/ABS/PLA ternary blend. Highlights The optimum PA6/ABS blend ratio to achieve high toughness was determined. The phase localization in the blends predicted via Spreading Coefficient. The interaction of PA6 and ABS enhanced by the addition of PLA in the blends. The mechanical properties of blends are correlated with rheological behavior. The flexural modulus of blends was higher than Halpin–Tsai model predictions.

Rubber‐toughened Polyamide‐6 with a Low Thermal Expansion Coefficient: Effect of Preferential Distribution of Rubber and Inorganic Filler

Rheological Properties of PET/PA66/Liquid Crystalline Copolyesteramide Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

In Situ Formation of the Core–Shell Particles and Their Function in Toughening PA6/SEBS-g-MA/PP Blends

Mechanism and properties of Super-Toughened ternary blends with unique 'Tassel-Bundle' morphology

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening Effects of "Core-Shell" Particles in PA6/SEBS-g-MA/PPO Blends

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Microstructures and Mechanical Properties of Polypropylene/polyamide 6/Polyethelene-Octene Elastomer Blends

Influence of Preparation Methods on the Structures and Properties for the Blends Between Polyamide 6co6t and Polyamide 6: Melt‐mixing and In‐situ Blending

The influence of extrusion process on micromorphology of PA 6/POE/POE-g-MA ternary blends: A quantitative analysis

Toughening Behavior and Morphology Study of PA6/thermal Liquid Crystalline Polyamide Blends

Significant Enhancement of Mechanical and Thermal Properties of Thermoplastic Polyester Elastomer by Polymer Blending and Nanoinclusion

Morphology, viscoelastic properties and the mechanical performance of highly toughened polyamide 6/acrylonitrile–butadiene–styrene/polylactic acid ternary blends

Biosourced Poly(lactic acid)/polyamide-11 Blends: Effect of an Elastomer on the Morphology and Mechanical Properties

Highly toughened PA6 using residue of plasticized PVB film via two-step reactive melt blending

Plastic damage mechanisms of polypropylene/polyamide 6/polyethelene-octene elastomer blends under cyclic tension

Study on Chain Extension Blending Modification and Foaming Behavior of Thermoplastic Polyamide Elastomer

Construction of Core‐Shell Structure in PA6/ABS/SEBS Blends for Achieving Stiffness‐Toughness Balance

High-Density Polyethylene-Based Ternary Blends Toughened by PA6/PBT Core–Shell Particles

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles