Abstract:Abstract A finite element model is developed in ABAQUS/CAE to simulate the behavior of one-way reinforced concrete slabs under air-blast loading. Several published empirical equations have been utilized to model air-blast pressure, P(t), for different combinations of the explosive charges and standoff distances. The values of the peak overpressure have been taken from the field explosion tests conducted on four normal reinforced concrete (NRC) slabs of size 2000 mm x 1000 mm x 100 mm in the School of Civil, Environmental, and Mining Engineering, The University of Adelaide, Australia (2009). The slabs were doubly reinforced with HYSD steel re-bars of diameter 12 mm spaced at 100 mm c/c in the major bending plane (ρ = 1.34%) and 200 mm c/c in the other plane (ρ = 0.74%), where “c/c” is the center-to-center distance between two adjacent re-bars. A plasticity-based damage model for concrete and an explicit solver in ABAQUS/CAE are adopted in the finite element (FE) simulation. The available test results and finite element analysis predictions, including maximum mid-span displacement and damage to the RC slabs, are presented and weighed. The computed results are found in good agreement with the experimental ones. The validated model is used to examine the performance of RC slabs with 25% replacement of the conventional steel re-bars by the FRP re-bars of equivalent strength on the compression face only, remote face only, and both faces of the slab. The replacement has been done for higher strength and ductility. Substituted FRP re-bars are of (1) Aramid fiber-reinforced polymer (AFRP), (2) Basalt fiber-reinforced polymer (BFRP), (3) Carbon fiber-reinforced polymer (CFRP), and (4) Glass fiber-reinforced polymer (GFRP). The results are also compared with those obtained with a 50% replacement of the steel re-bars by the FRP re-bars.

A Numerically Efficient Finite Element Analysis of Reinforced Concrete Members Subjected to Blasts

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Evaluating concrete material models for blast analysis using 3D finite element analysis

Numerical analysis of reinforced concrete buildings subjected to blast load

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Numerical Simulation of Air Shock Wave Propagation Effects in Reinforced Concrete Columns

A Femp Method and Its Application in Modeling Dynamic Response of Reinforced Concrete Subjected to Impact Loading

Finite Element Simulation of FRP Strengthened Reinforced Concrete Slabs under Two Independent Air Blasts

Computer Simulation of Dynamic Brittle Damage Process in Arch Dam Due to Blast Load

Numerical analysis of prestressed reinforced concrete beam subjected to blast loading

Blast performance of RC columns with different levels of concrete grades and reinforcing ratios

Numerical analysis of axial load effects on RC bridge columns under blast loading

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Performance of One-way Composite Reinforced Concrete Slabs under Explosive-induced Blast Loading

Dynamic Response of Reinforced Concrete Slab Subjected to Internal Blast Loading

Sensitivity Analysis of Factors Influencing Blast-like Loading on Reinforced Concrete Slabs Based on Grey Correlation Degree

Experimental Investigation and Numerical Simulation on the Blast Resistance of Reactive Powder Concrete Subjected to Blast by Embedded Explosive