Abstract:The threat of terrorist bombing attacks on critical infrastructure has attracted a lot of attentions over the past decades. Contact explosion with a small explosive charge mass can cause severe damage to RC columns. Since columns are the primary load-bearing components in structures, the failure of critical columns can initiate collapse of the entire structure and result in devastating consequences associate with significant casualties and economic losses. To prevent catastrophic structural collapse, the most critical requirement of blast-damaged columns would be the residual capacity to withstand axial load. In this study, the residual axial load-carrying capacity of RC columns damaged by contact explosions was numerically investigated. A high-fidelity physics-based numerical model of RC columns under contact explosions was developed using the non-linear dynamic analysis program LS-DYNA with Arbitrary-Lagrangian–Eulerian (ALE) and Fluid-Structure Interaction (FSI) algorithms. The numerical model was comprehensively validated with existing experimental results in literature. An extensive parametric study was carried out to determine the effect of critical design parameters, including explosive charge mass, column diameter, longitudinal reinforcement ratio, and transverse reinforcement ratio on the residual axial load-carrying capacity of RC columns after contact explosions. The damage degree of the blast-damaged columns was quantitatively analyzed with a damage criterion based on the residual axial load-carrying capacity. Based on the parametric analysis results, an empirical formula was developed through multivariable regression analysis method for prediction of the damage degree and residual axial load-carrying capacity of blast-damaged RC columns under contact explosions. The proposed empirical formula can be utilized in preliminary design of RC columns against contact explosions and failure risk assessment of RC columns after contact explosions.

Numerical Simulation of Air Shock Wave Propagation Effects in Reinforced Concrete Columns

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Investigation on Damage Mechanism of RC Column under Close-in Explosion

Numerical analysis of reinforced concrete buildings subjected to blast load

Numerical study on effect of constant and variable axial loads on RC column subjected to blast load

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Blast performance of RC columns with different levels of concrete grades and reinforcing ratios

Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions

Residual axial capacity of circular reinforced concrete columns subjected to contact explosions

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

The Numerical Investigation of Aluminum Foam-protected Reinforced Concrete Slabs under Blast Loading Using AUTODYN-3D

Simulation of Reinforced Concrete Slabs in Residential Buildings Under Internal Gas Blast

Numerical simulation of dynamic response of reinforced concrete member under explosive load

Numerical analysis of axial load effects on RC bridge columns under blast loading

Blast Resistance of Small-Scale RCS in Experimental Test and Numerical Analysis

Dynamic Analysis of Structural Columns Subjected to Impulsive Loading

Investigation on Anti-Explosion Performance of Reinforced Concrete Slab with Composite Protective Aluminum Foam

Evaluating concrete material models for blast analysis using 3D finite element analysis

Dynamic Response of Reinforced Concrete Slab Subjected to Internal Blast Loading