Abstract:To study the blast resistance and damage rule of ultra-high toughness cementitious composites (UHTCC) subjected to blast by embedded explosives, blast resistance tests of embedded explosives were carried out on UHTCC and high-strength concrete (HSC) with different embedded depths of explosives. The damage patterns of the targets of the two materials were obtained. Using the test results of contact explosion, the blast resistance parameters of the above two materials were calculated. The test results show that UHTCC has better blast resistance than high-strength concrete under the same test conditions. To further explore the influence of compressive strength, tensile strength and tensile toughness on the blast resistance of UHTCC targets to embedded explosives, the improved K&C model was used to numerically simulate the UHTCC target subjected to blast by explosives with an embedded depth of 40 mm. The simulation results were basically consistent with the experimental results. According to the results of numerical simulation, the rule that the attenuation speed of the explosion shock wave along the radial direction of target was greater than that along the axial direction was obtained, which verified the validity of the model. Then, by adjusting the parameters related to the compressive strength, tensile strength and tensile toughness in the modified K&C model, the damage patterns of the UHTCC targets with different compressive and tensile strengths and tensile toughness were predicted. It is found that enhancing the toughness of UHTCC can effectively prevent the target from undergoing overall damage, increasing the tensile strength of UHTCC can reduce the cratering diameter of the blasting surface, and increasing the compressive strength of the material has no obvious effect on reducing the cratering size. These studies can provide a basis for the application of UHTCC materials in protection engineering.

Experimental Investigation and Numerical Simulation on the Blast Resistance of Reactive Powder Concrete Subjected to Blast by Embedded Explosive

Anti-explosion Tests and Numerical Simulations of Ultra-High Toughness Cementitious Composites Subjected to Blast by Embedded Explosives

Experimental research on seismic behavior of concrete-filled reactive powder concrete tubular columns

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

A Novel Dynamic Cavity Expansion Model to Predict the Resistance of Reactive Powder Concrete (RPC) Against Projectile Impact

Experimental and numerical study of corrugated steel-plain concrete composite structures under contact explosions

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Blast Resistance of Small-Scale RCS in Experimental Test and Numerical Analysis

Modeling the Fire Response of Reactive Powder Concrete Beams with Due Consideration to Explosive Spalling

Blast Resistance of ECC and Composite Slabs Subjected to Near-Field Explosion

Spallation Mechanism of RC Slabs under Contact Detonation

Experiment and Numerical Investigations of Ultra-High Toughness Cementitious Composite Slabs under Contact Explosions

Numerical simulation of dynamic response of reinforced concrete member under explosive load

Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions

Numerical Simulation of Steel-Reinforced Reactive Powder Concrete Beam Based on Bond-Slip

Dynamic Response of Reinforced Concrete Slab Subjected to Internal Blast Loading

Peridynamics simulations of the damage of reinforced concrete structures under radial blasting

Simplified Theoretical Analysis and Numerical Study on the Dynamic Behavior of FCP under Blast Loads

Experimental and Numerical Investigation of Steel-Concrete (SC) Slabs under Contact Blast Loading