Abstract:Abstract A finite element model is developed in ABAQUS/CAE to simulate the behavior of one-way reinforced concrete slabs under air-blast loading. Several published empirical equations have been utilized to model air-blast pressure, P(t), for different combinations of the explosive charges and standoff distances. The values of the peak overpressure have been taken from the field explosion tests conducted on four normal reinforced concrete (NRC) slabs of size 2000 mm x 1000 mm x 100 mm in the School of Civil, Environmental, and Mining Engineering, The University of Adelaide, Australia (2009). The slabs were doubly reinforced with HYSD steel re-bars of diameter 12 mm spaced at 100 mm c/c in the major bending plane (ρ = 1.34%) and 200 mm c/c in the other plane (ρ = 0.74%), where “c/c” is the center-to-center distance between two adjacent re-bars. A plasticity-based damage model for concrete and an explicit solver in ABAQUS/CAE are adopted in the finite element (FE) simulation. The available test results and finite element analysis predictions, including maximum mid-span displacement and damage to the RC slabs, are presented and weighed. The computed results are found in good agreement with the experimental ones. The validated model is used to examine the performance of RC slabs with 25% replacement of the conventional steel re-bars by the FRP re-bars of equivalent strength on the compression face only, remote face only, and both faces of the slab. The replacement has been done for higher strength and ductility. Substituted FRP re-bars are of (1) Aramid fiber-reinforced polymer (AFRP), (2) Basalt fiber-reinforced polymer (BFRP), (3) Carbon fiber-reinforced polymer (CFRP), and (4) Glass fiber-reinforced polymer (GFRP). The results are also compared with those obtained with a 50% replacement of the steel re-bars by the FRP re-bars.

Finite Element Simulation of FRP Strengthened Reinforced Concrete Slabs under Two Independent Air Blasts

Finite Element Modelling of Two-way RC Slabs with Varying Modelling Choices

Damage Mechanism Of Reinforced Concrete Slab Under Internal Blast Loading

Numerical Simulation of Blast Loads and Dynamic Response of Reinforced Concrete Slab Subjected to Close-in Explosion

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Performance of One-way Composite Reinforced Concrete Slabs under Explosive-induced Blast Loading

Spallation Mechanism of RC Slabs under Contact Detonation

Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions

Dynamic Response of Reinforced Concrete Slab Subjected to Internal Blast Loading

PREDICTION OF DEBRIS LAUNCH VELOCITY OF REINFORCED CONCRETE SLAB SUBJECTED TO INTERNAL BLAST LOADING

Evaluating concrete material models for blast analysis using 3D finite element analysis

Finite element modeling of FRP retrofitted RC column against blast loading

Numerical analysis of reinforced concrete buildings subjected to blast load

Investigation on Damage Mechanism of RC Column under Close-in Explosion

Simulation of Reinforced Concrete Slabs in Residential Buildings Under Internal Gas Blast

The efficiency of using CFRP as a strengthening technique for reinforced concrete beams subjected to blast loading

Validation study on numerical simulation of RC response to close-in blast with a fully coupled model

Improved Finite Difference Analysis of Dynamic Responses of Concrete Members Reinforced with FRP Bars under Explosion

Multiple blast behavior of steel wire mesh reinforced geopolymer based high performance concrete (G‐HPC) slab: Experiment and numerical simulation

Investigation on Anti-Explosion Performance of Reinforced Concrete Slab with Composite Protective Aluminum Foam

Blast Responses of Concrete Beams Reinforced with GFRP Bars: Experimental Research and Equivalent Static Analysis