Abstract:The importance of amorphous and nanocrystalline Fe-based soft magnetic materials is increasing annually. Thus, characterisation of the chemical compositions, alloying additives, and crystal structures is significant for obtaining the appropriate functional properties. The purpose of this work is to present comparative studies on the influence of Nb (1, 2, 3 at.%) and Mo (1, 2, 3 at.%) in Fe substitution on the thermal stability, crystal structure, and magnetic properties of a rapidly quenched Fe79.4Co5Cu0.6B15 alloy. Additional heat treatments in a vacuum (260-640 °C) were performed for all samples based on the crystallisation kinetics. Substantial improvement in thermal stability was achieved with increasing Nb substitution, while this effect was less noticeable for Mo-containing alloys. The heat treatment optimisation process showed that the least lossy states (with a minimum value of coercivity below 10 A/m and high saturation induction up to 1.7 T) were the intermediate state of the relaxed amorphous state and the nanocomposite state of nanocrystals immersed in the amorphous matrix obtained by annealing in the temperature range of 340-360 °C for 20 min. Only for the alloy with the highest thermal stability (Nb = 3%), the α-Fe(Co) nanograin grows, without the co-participation of the hard magnetic Fe3B, in a relatively wide range of annealing temperatures up to 460 °C, where the second local minimum in coercivity and core power losses exists. For the remaining annealed alloys, due to lower thermal stability than the Nb = 3% alloy, the Fe3B phase starts to crystallise at lower annealing temperatures, making an essential contribution to magneto-crystalline anisotropy, thus the substantial increase in coercivity and induction saturation. The air-annealing process tested on the studied alloys for optimal annealing conditions has potential use for this type of material. Additionally, optimally annealed Mo-containing alloys are less lossy materials than Nb-containing alloys in a frequency range up to 400 kHz and magnetic induction up to 0.8 T.

A Mössbauer Study of the Permanent Magnets Nd 15 (fe,co) 77 B 8 with Dy and Al Additives

Influence of Cu and Gd on Thermal Stability and Magnetic Properties of Nd(DyAl)FeB Magnets

Study Magnetic Properties and Corrosion Resistance of Sintered NdFeBAlDyNb Magnets

Effects of Nd and Co on thermal stability of nanocomposite Nd2Fe14B/a-Fe magnets

A Mössbauer Effect Study of the Structural and Magnetic Properties of Y2(Fe1−xAlx) 14B

A Mössbauer effect study of the magnetic properties of Nd<sub>2</sub>(Fe<sub>1−<i>x</i></sub>Co<sub><i>x</i></sub>)<sub>1</sub><sub>4</sub>B and Y<sub>2</sub>(Fe<sub>1−<i>x</i></sub>Co<sub><i>x</i></sub>)<sub>1</sub><sub>4</sub>B

Thermal Behaviour and Magnetic Properties of B-Rich Ndfeb Nanocomposite Hard Magnetic Alloys with Partial Substitution of Dy for Nd

A Study of the Magnetism, Magnetostriction and M(o)ssbauer of Tb0.3Dy0.7(Fe1-xAIx)1.95 Alloys

Mössbauer and Structure-Magnetic Properties Analysis of AyB1−yCxFe2−xO4 (C=Ho,Gd,Al) Ferrite Nanoparticles Optimized by Doping

A Structural, Magnetic and Mössbauer Study of Tb 0.3 Dy 0.7 (Fe 1− x Al x ) 1.95 Alloys

Influence of a Small Addition of Nd on Structure and Magnetic Properties of Nanocrystalline Fe–B Alloys

Nanoscale Structure and Magnetic Properties of Nd-Fe-nb-b-c Permanent Magnets

Influence of Nb and Mo Substitution on the Structure and Magnetic Properties of a Rapidly Quenched Fe79.4Co5Cu0.6B15 Alloy

Magnetic Properties of Amorphous Nd2(Fe1−xCox)23

The Magnetic Properties of Melt-Spun Nd9Fe85−xMnxB6(x=0–1) Ribbons

Study of Structural and Magnetic Properties of Iron-Rich Mixed Rare-Earth&lt;tex&gt;$hbox NdDyFe_ (17-Y-x)hbox Co_xhbox Si_ Y$&lt;/tex&gt;compounds

Magnetostriction, Spin Reorientation and Mossbauer Study of Tb0.3Dy0.7(Fe1-xAlx)(1.95) Intermetallic Compounds

Structure, Spin Reorientation and Mössbauer Effect Studies of Tb 0.3 Dy 0.7 (fe 1− X Al X ) 1.95 Alloys

Effect of Nd-Co on microstructure and magnetic properties of Nd-Ce-Y-Fe-B sintered magnets

Sm3(Fe,Co,Mo)29 compounds: Promising materials for permanent magnets

Magnetic Properties of Nd(Fe1-xCox)10.5M1.5 (m=mo and V) and Their Nitrides