Abstract:An environmentally friendly, sensitive and simple method was developed for the determination of trace lead in water samples by air mixing sorption flow injection(FI) on-line preconcentration procedure in a knotted reactor coupled with flame atomic absorption spectrometry (FAAS). The sample, complexing agent, and air were merged on-line. The complex compound formed by metal ion and complexing agent was flew through the knotted reactor (KR) and adsorbed onto the inner walls of the KR. After this, an air flow was introduced into the KR in order to prevent former and latter solution from being mixed. Then ethanol was employed to elute the adsorbed complex compound and deliver the analyte into the FAAS system for on-line detection. During the preconcentration procedure, the adsorption effect of complex compound onto the inner walls of the KR, and the enhancement factor (EF) were increased by introducing the air. Compared to multiplexed sorption preconcentration procedure, the new method reduced the preconcentration time, and received better adsorption effect. The preconcentration time was 60 s, preconcentration flow rate was 4.8 mL/min, the EF was 46, the sample throughput was 40/h, and the detection limit (3σ) was 4.8 μg/L for lead. The relative standard deviation (RSD, n=11) was 2.3% for lead of 0.50 mg/L. The method has been applied to the determination of trace lead with the recovery from 97.4% to 100.9% using triethanolamine as masking reagent.

Combination of Knotted Reactor with Portable Tungsten Coil Electrothermal Atomic Absorption Spectrometer for On-Line Determination of Trace Cadmium

On-line Precipitation–dissolution in Knotted Reactor for Thermospray Flame Furnace AAS for Determination of Ultratrace Cadmium

A new coupling of ionic liquid based-single drop microextraction with tungsten coil electrothermal atomic absorption spectrometry.

Flow Injection Hydride Generation for On-Atomizer Trapping: Highly Sensitive Determination of Cadmium by Tungsten Coil Atomic Absorption Spectrometry

Investigation of a Portable Tungsten Coil Electrothermal Atomic Absorption Spectrometer for Analysis of Nickel after Rapidly Synergistic Cloud Point Extraction

Flow injection hydride generation and on-line W-coil trapping for electrothermal vaporization dielectric barrier discharge atomic emission spectrometric determination of trace cadmium

Portable Atomic Absorption Spectrometer For Determination Of Copper, Chromium, Lead And Cadmium In Environmental Water

A Sequential Injection On-Line Column Preconcentration System for Determination of Cadmium by Electrothermal Atomic Absorption Spectrometry

Determination of Cadmium in Rice and Water by Tungsten Coil Electrothermal Vaporization-Atomic Fluorescence Spectrometry and Tungsten Coil Electrothermal Atomic Absorption Spectrometry after Cloud Point Extraction.

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

Atomic-Absorption Determination of Traces of Cadmium in Urine after Electrodeposition Onto A Tungsten Wire

Air mixing sorption flow injection preconcentration in a knotted reactor coupled with flame atomic absorption spectrometry for determination of trace lead in water

Determination of trace cobalt, nickel and cadmium by on-line flow injection analysis with coprecipitation preconcentration FAAS

Application of portable tungsten coil electrothermal atomic absorption spectrometer for the determination of trace cobalt after ultrasound-assisted rapidly synergistic cloud point extraction

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration

Determination Of Cr(Vi) By Portable Tungsten Coil Electrothermal Atomic Absorption Spectrometer After Surfactant-Assisted Dispersive Liquid-Liquid Microextraction

Investigation of Dispersive Solid-Phase Extraction Combined with Slurry Sampling Thermospray Flame Furnace Atomic Absorption Spectrometry for the Determination of Cadmium

Flow Injection On-Line Separation and Preconcentration for Electrothermal Atomic Absorption Spectrometry. Part 1. Determination of Ultratrace Amounts of Cadmium, Copper, Lead and Nickel in Water Samples

Improved Performance of On-line Atom Trapping in Flame Furnace Atomic Absorption Spectrometry by Chemical Vapor Generation: Determination of Cadmium in High-Salinity Water Samples

A flow injection knotted reactor suction elution method coupled with flame atomic absorption spectrometry for the determination of trace lead and zinc in water

Online Flow-Injection Cobalt-Ammonium Pyrrolidin-1-Yldithioformate Coprecipitation for Preconcentration of Trace Amounts of Metals in Waters with Simultaneous Determination by Inductively-Coupled Plasma-Atomic Emission-Spectrometry