Abstract:A tungsten coil (W-coil) as an electrothermal vaporizer (ETV) was interface-free integrated with a point discharge (PD) microplasma as an excitation source for a miniaturized optical emission spectrometer (OES). The PD microplasma and the W-coil ETV were vertically arranged in one quartz tube, and the W-coil was directly placed just under the PD without any physical interface. Working gas flow could sweep them successively to carry analytes released from the W-coil to the PD microplasma, and exhaust out of the quartz tube. The W-coil firstly acted as an ETV for sampling, on which pipetted with a tiny amount of sample solution (typically 10 μL), followed by a heating program for eliminating sample moisture and matrix. Vapor of analytes was subsequently released from the W-coil at a high temperature and immediately swept into the PD microplasma for excitation of atoms to obtain their optical emission spectra. Due to the high temperature of the W-coil, the released analyte species from the W-coil probably had been already atomized/excited partly and partially maintained prior to entering into the PD microplasma, thus saving the energy in the PD for sample evaporation and dissociation. In other words, the W-coil indirectly provided extra energy to the PD microplasma, thus its excitation capability was intensified. Under optimal experimental conditions, simultaneous determination of Ag, As, Bi, Cd, Cu, In, Pb, Sb and Zn was achieved, with LODs of 0.6, 45, 40, 0.08, 15, 8, 8, 41 and 5 μg L-1, respectively, and RSDs all less than 4.5% (n=3, at corresponding concentrations of 5, 250, 250, 0.5, 100, 50, 50, 250 and 25 μg L-1). The accuracy validation of the proposed technique was demonstrated by successfully analyzing Certified Reference Materials (CRMs, including water, soil, stream sediment and biological samples), and preliminarily analyzing one CRM with direct slurry injection, both with satisfactory results, which had no significant difference with the certificated values at a confidence level of 95% by t-test.

Flow injection hydride generation and on-line W-coil trapping for electrothermal vaporization dielectric barrier discharge atomic emission spectrometric determination of trace cadmium

Development of a miniaturized hydride generation-dielectric barrier discharge atomic absorption spectrometer

Flow Injection On-Line Coprecipitation Preconcentration for Electrothermal Atomic Absorption Spectrometry

A Sequential Injection On-Line Column Preconcentration System for Determination of Cadmium by Electrothermal Atomic Absorption Spectrometry

Evaluation of Tungsten Coil Electrothermal Vaporization-Ar/h2 Flame Atomic Fluorescence Spectrometry for Determination of Eight Traditional Hydride-Forming Elements and Cadmium Without Chemical Vapor Generation.

Interface-free integration of electrothermal vaporizer and point discharge microplasma for miniaturized optical emission spectrometer

Flow Injection–electrochemical Hydride Generation Technique for Atomic Absorption Spectrometry. Invited Lecture

Microplasma source based on a dielectric barrier discharge for the determination of mercury by atomic emission spectrometry.

Low Temperature Hydrogen Plasma Assisted Chemical Vapor Generation for Atomic Fluorescence Spectrometry

Determination of Metals in Environmental Waters by Solution Cathode Glow Discharge -Atomic Emission Spectroscopy (SCGD-AES) with a Syringe Pump for Sample Introduction

Microdischarge in Flame as a Source-in-Source for Boosted Excitation of Optical Emission of Chromium

Highly sensitive determination of cadmium and lead in whole blood by electrothermal vaporization-atmospheric pressure glow discharge atomic emission spectrometry

A microfluidic system for introduction of nanolitre sample in inductively coupled plasma mass spectrometry using electrokinetic flow combined with hydrodynamic flow

Dielectric Barrier Discharge Atomizer for Mercury Speciation by HPLC-CVG Atomic Fluorescence Spectrometry

Direct Determination of Lead and Cadmium in Distilled Spirits by Inductively Coupled Plasma Mass Spectrometry Coupled with Chip-Based Microflow Injection System

Rapid and simultaneous detection of cadmium and mercury in foods based on solid sampling integrated electrothermal vaporization technique

Diverse Thermal Desorption Combined with Self-Aspirating Corona Discharge Ionization for Direct Mass Spectrometry Analysis of Complex Samples.

Analysis of Trace Heavy Metal in Solution Using Liquid Cathode Glow Discharge Spectroscopy

Determination of Se, Pb, and Sb by Atomic Fluorescence Spectrometry Using a New Flameless, Dielectric Barrier Discharge Atomizer

On-line microplasma decomposition of gaseous phase interference for solid sampling mercury analysis in aquatic food samples

Determination of cadmium in biological materials by flame atomic absorption spectrometry with flow-injection on-line sorption preconcentration