Abstract:This paper presents a differential low power low noise amplifier designed for the wireless sensor network (WSN) in a TSMC 0.18 μm RF CMOS process.A two-stage cross-coupling cascaded common-gate (CG)topology has been designed as the amplifier.The first stage is a capacitive cross-coupling topology.It can reduce the power and noise simultaneously.The second stage is a positive feedback cross-coupling topology,used to set up a negative resistance to enhance the equivalent Q factor of the inductor at the load to improve the gain of the LNA.A differential inductor has been designed as the load to achieve reasonable gain.This inductor has been simulated by the means of momentum electromagnetic simulation in ADS.A “double-π” circuit model has been built as the inductor model by iteration in ADS.The inductor has been fabricated separately to verify the model.The LNA has been fabricated and measured.The LNA works well centered at 2.44 GHz.The measured gain S21 is variable with high gain at 16.8 dB and low gain at 1 dB.The NF (noise figure) at high gain mode is 3.6 dB,the input referenced 1 dB compression point (IP1dB) is about-8 dBm and the IIP3 is 2 dBm at low gain mode.The LNA consumes about 1.2 mA current from 1.8 V power supply.

Design of Low Voltage Low Noise Amplifier for 800MHz WSN Applications

A 11.2 Mw 48–62 GHz Low Noise Amplifier in 65 Nm CMOS Technology

Analysis And Design Of Inductorless Wideband Low-Noise Amplifier With Noise Cancellation Technique

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

Analysis and Design of Wideband Low Noise Amplifier with Digital Control

A 2.4 Ghz 1v Low Power Lna in Subthreshold Region

Design and Optimization of A 0.5 V Cmos Lna for 2.4-Ghz Wsn Application

A 0.5V CMOS LNA for 2.4-Ghz WSN Application

Design of a Wideband Low Noise Amplifier for 70-1000Mhz Frequency Range

Design of Low Power Common-Gate Low Noise Amplifier for 2.4 Ghz Wireless Sensor Network Applications

A 1 V Folded Common-Gate CMOS Low Noise Amplifier for Wireless Sensor Network Applications.

Design of an Ultra-Wideband Low Noise Amplifier in a 0.18 Μm CMOS

Design of Low Noise Amplifier for Wireless Sensor Network

Design of a 2.4/5.2 GHz Dual-Band Low-Noise Amplifier in 0.18 μm CMOS Progress

Design of a subthreshold biased low power low noise amplifier for 2.4GHz wireless sensor networks

Low Power 2.4GHz 0. 18μm CMOS Fully Integrated Low Noise Amplifier

Design of a low noise amplifier using noise-canceling

Design of a Low Power CMOS Low Noise Amplifier

Design and Implementation of 800MHz CMOS LNA

A 76-107-GHz Low-Noise Amplifier with 17-dB Gain and 6.3-dB NF in 40-nm CMOS