Abstract:The gun barrel erosion caused by the burning of high energy propellants is becoming increasingly severe, significantly reducing the useful life of gun barrel. In order to address this problem, erosion reducing additives, including TiO2, paraffin, polyurethane or a combination of these, were introduced into the gun propellant or propellant charge system to alleviate the gun barrel erosion. In this article, a new type of flexible phase change composite materials (FPCMs) having excellent thermal stability and superior mechanical performance was successfully designed by incorporating paraffin/BN@PMMA (microPCMs) mixed with different binders of waterborne polyurethane (WPU), carboxylic butadiene-styrene latex (cBSL), and butadiene-styrene latex (BSL) on the fabric surface and applied as protective liners of cartridge case. Therein, the microPCMs was constructed with paraffin as the core and polymethyl methacrylate (PMMA) enforced by nano boron nitride (BN) as the shell by Pickering emulsion polymerization method. The morphology, chemical composition, and phase change behaviors of these prepared FPCMs were analyzed by SEM, FTIR, and DSC, respectively. Results show that these microPCMs with spherical structure but a little rough surface could be evenly distributed in the warp and weft structure of pristine fabric. The resulting FPCM sample containing WPU has the highest phase change latent heat of 38.77 J/g among these FPCMs. Additionally, TG and isothermal TG experiments reveal that the incorporation of binders has a positive effect on FPCMs thermal stability and FPCM sample containing cBSL exhibit the most remarkable thermal stability. The tensile experiments demonstrate that these FPCMs display the desirable mechanical performance and exhibit brittle fraction model. The tensile strength and elongation at break of FPCMs can be enhanced by the introducing of these binders. Pretreating pure fabric with gelatin is proved to be the most effective way in improving the mechanical performance of FPCMs. Herein, FPCM containing WPU has the highest ultimate tensile strength that can be up to 293.53 MPa. The novel flexible phase change composite materials could be a promising candidate to be used as protective liners to reduce the gun barrel erosion induced by the combustion of high energy propellants.

Preparation and performance studies on organic-inorganic phase change composites based on zeolitic imidazolate and paraffin for reducing gun barrel erosion

Design and characterization of novel flexible phase change composite materials as protective liners for the cartridge case

A novel structure to inhibit barrel erosion induced by thermal effects in a propulsion system

Retracted: A Novel Composite Coating to Improve the Environmental Adaptability of Combustible Cartridges

Research on the Erosion of Gun Barrel Based on Vented Vessel Tests

Preparation of ZIF-67@DTMS NPs/Epoxy Composite Coating and Its Anti-Corrosion Performance for Q235 Carbon Steel in 3.5 Wt% NaCl Solution

Enhanced combustion performance of Al Zn alloys with property optimization inspired by "two-way tunneling" strategy

Influence of layered zinc hydroxide nitrate on thermal properties of paraffin/intumescent flame retardant as a phase change material

Zeolitic imidazolate frameworks dispersed in waterborne epoxy resin to improve the anticorrosion performance of the coatings

Preparation of a novel 2-amino benzothiazole loaded ZIF-8/layer double hydroxide composite and its application in anti-corrosion epoxy coatings

ZrO 2 -reinforced polymer-matrix composites used for thermal protection systems of ultra-high temperature aerospace propulsion

The effect of Al/oxidizers interfacial structure on the mechanical properties of composite propellants

Study on Poly(ferrocenylsilane) and Its Promotive Effect to Decomposition of Ammonium Perchlorate

Study of Impact Characteristics of ZrO2 Ceramic Composite Projectiles on Ceramic Composite Armor

Influence of different energetic plasticizers on the performance of NC-RDX nitramine gun propellants

Synthesis of zirconium aminotrimethylene phosphonate nanorods and their application in toughened and flame retarded epoxy composites

Precise Regulation of Combustion Characteristics of High-Energy Composite Propellants by Incorporation of CL-20 Crystals Intercalated with Energetic Burn Rate Modifiers

The Effect of Several Tetrazole Derivatives as Additives on the Extreme-pressure and Antiwear Properties of Liquid Paraffin and a Lithium Grease

Efficient and sustainable synthesis of ZIF-67 for synergistically improving reaction-to-fire properties of biomass-based polypropylene composites

Construction of zirconium tungstate modified polymer bonded energetic composites with highly inhibited thermal expansion via bioinspired interfacial reinforcement

Enhancing char formation of flame retardant epoxy composites: Onigiri-like ZIF-67 modification with carboxymethyl β-cyclodextrin crosslinking