Abstract:Aluminum has been long and widely used in propellants, thermite, and pyrotechnics. However, the commonly used micron aluminum has the problems of slow burning rate and incomplete release of chemical energy in the combustion process. Therefore, finding ways to promote the ignition and combustion of aluminum is essential to enhance the performance of aluminum-based energetic materials. Herein, environmentally friendly tannic acid (TA) and tea polyphenols (TP) were used to surface modify aluminum to improve its combustion performance, respectively. The results showed that TA and TP could be coated on the outer surface of aluminum particles effectively by solvent evaporation induced self-assembly method. Heat was released during the thermal decomposition of the composite particles, which was clearly beneficial in promoting aluminum ignition. Ignition and combustion tests showed that after modification with TA and TP, the samples showed shorter ignition delay, increased combustion time, increased combustion intensity, and reduced agglomeration compared to pure aluminum. This revealed that the modified samples possessed better ignition and combustion properties. The X-ray diffraction patterns of the condensed combustion products showed that the products of pure aluminum possessed more active aluminum and aluminum nitride, while the samples modified with TA and TP had more γ-Al2O3 and α-Al2O3, suggesting that TA and TP could effectively enhance the combustion efficiency of aluminum. In addition, TP showed better modification than TA, which may be related to the higher heat release during thermal decomposition of TP. Although TA and TP can improve the ignition and combustion performance of aluminum to some extent, the enhancement effect is limited. Considering that TA and TP possess good adhesion, perhaps they can play a better role in promoting as intermediate layers in the future. It is hoped that this paper can provide a new idea for the surface modification of aluminum.

Enhanced combustion performance of Al Zn alloys with property optimization inspired by "two-way tunneling" strategy

Enhanced combustion performance of core-shell aluminum with poly(vinylidene fluoride) interfacial layer: Constructing the combination bridge of aluminum powder and poly(vinylidene fluoride)

An approach to the induced reaction mechanism of the combustion of the nano-Al/PVDF composite particles

Improved ignition and combustion performances of aluminum nanoparticles by in-situ partial conversion of native alumina to surface Al-MOF shell

In situ preparation of Al@3-Perfluorohexyl-1, 2-epoxypropane@glycidyl azide polymer (Al@PFHP@GAP) high-energy material

Preparation of high-energy Al-Li alloy powders with enhanced compatibility and combustion performance by dense fluorosilane polymer composite coating

Tuning the Reactivity of Perfluoropolyether-Functionalized Aluminum Nanoparticles by the Reaction Interface Fuel-Oxidizer Ratio

The combustion-supporting mechanism of fluoropolymer on aluminum particles using reactive dynamics simulations

Enhancing the combustion of nAl with AlF 3 coating: gas–solid reaction mechanism for reducing combustion agglomeration of Al powder

Enhancing energy release of aluminized propellants and explosives through fluorinated binder

Modifying the ignition, combustion and agglomeration characteristics of composite propellants via Al-Mg alloy additives

Polyphenols-inspired interface modification and reduced agglomeration of solid propellants via a functionalized fluorine-containing organic substance coating layer

Enhancing the Combustion Performance of Metastable Al@AP/PVDF Nanocomposites by Doping with Graphene Oxide

Combustion performance modulation and agglomeration inhibition of HTPB propellants by fine Al/oxidizers integration

Ignition and Combustion Characteristics of Aluminum-Based Fluorine-Containing Composite Powder

One zirconia-based ceramic coating strategy of combustion stabilization for fuel-rich flames in a small-scale burner

Enhancing the Ignition and Combustion Performance of Aluminum by Surface Modification: Tannic Acid and Tea Polyphenols

The effect of Al/oxidizers interfacial structure on the mechanical properties of composite propellants

Pickering emulsion to the construction of spherical nAl/PVDF complexes with excellent thermal properties

Enhanced stability and combustion performance of AlH3 in combination with commonly used oxidizers

Rational design of gradient structured fluorocarbon/Al composites towards tunable combustion performance