Abstract:The gun barrel erosion caused by the burning of high energy propellants is becoming increasingly severe, significantly reducing the useful life of gun barrel. In order to address this problem, erosion reducing additives, including TiO2, paraffin, polyurethane or a combination of these, were introduced into the gun propellant or propellant charge system to alleviate the gun barrel erosion. In this article, a new type of flexible phase change composite materials (FPCMs) having excellent thermal stability and superior mechanical performance was successfully designed by incorporating paraffin/BN@PMMA (microPCMs) mixed with different binders of waterborne polyurethane (WPU), carboxylic butadiene-styrene latex (cBSL), and butadiene-styrene latex (BSL) on the fabric surface and applied as protective liners of cartridge case. Therein, the microPCMs was constructed with paraffin as the core and polymethyl methacrylate (PMMA) enforced by nano boron nitride (BN) as the shell by Pickering emulsion polymerization method. The morphology, chemical composition, and phase change behaviors of these prepared FPCMs were analyzed by SEM, FTIR, and DSC, respectively. Results show that these microPCMs with spherical structure but a little rough surface could be evenly distributed in the warp and weft structure of pristine fabric. The resulting FPCM sample containing WPU has the highest phase change latent heat of 38.77 J/g among these FPCMs. Additionally, TG and isothermal TG experiments reveal that the incorporation of binders has a positive effect on FPCMs thermal stability and FPCM sample containing cBSL exhibit the most remarkable thermal stability. The tensile experiments demonstrate that these FPCMs display the desirable mechanical performance and exhibit brittle fraction model. The tensile strength and elongation at break of FPCMs can be enhanced by the introducing of these binders. Pretreating pure fabric with gelatin is proved to be the most effective way in improving the mechanical performance of FPCMs. Herein, FPCM containing WPU has the highest ultimate tensile strength that can be up to 293.53 MPa. The novel flexible phase change composite materials could be a promising candidate to be used as protective liners to reduce the gun barrel erosion induced by the combustion of high energy propellants.

Design and characterization of novel flexible phase change composite materials as protective liners for the cartridge case

Phase Change Materials of Paraffin in H-Bn Porous Scaffolds with Enhanced Thermal Conductivity and Form Stability

Preparation and performance studies on organic-inorganic phase change composites based on zeolitic imidazolate and paraffin for reducing gun barrel erosion

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Retracted: A Novel Composite Coating to Improve the Environmental Adaptability of Combustible Cartridges

A novel flexible composite phase change material applied to the thermal safety of lithium-ion batteries

Thermal Property Enhancement of Paraffin-Wax-Based Hydroxyl-Terminated Polybutadiene Binder with a Novel NanoSiO(2)-Expanded Graphite-PW Ternary Form-Stable Phase Change Material

A Novel Flexible Composite Phase Change Material with Enhanced Toughness and Shape Stability for Battery Thermal Management

Efficient preparation of polydimethylsiloxane‐based phase change composites with sandwich structure

Thermal and Mechanical Reinforcement of a Novel Paraffin-Based Hydroxyl-Terminated Polybutadiene (HTPB) Binder Containing a Three-Dimension (3D) Diurea–paraffin Wax (DU–PW) for Prevention of PW Leakage

Synthesis melamine-formaldehyde microcapsules containing paraffin to improve the tribological properties of self-lubricating fabric liner composites

Preparation and characterization of flame retardant form-stable phase change materials composed by EPDM, paraffin and nano magnesium hydroxide

Preparation and Characterization of Double-Shell Phase Change Material Microcapsules with Flame Retardancy and Temperature Regulation Capability As Low-Emission Building Fillers

A High Heat Storage Capacity Form-Stable Composite Phase Change Material with Enhanced Flame Retardancy

The thermal behavior and flame retardant performance of phase change material microcapsules with modified carbon nanotubes

3D printing, leakage-proof, and flexible phase change composites for thermal management application

Flame-retardant phase change material (PCM) for thermal protective application in firefighting protective clothing

Integration of safety and energy storage: Experimental study on thermal and flame-retardant properties of ammonium polyphosphate/polyvinyl alcohol/modified melamine foam as a composite phase change material

Epoxy resin/ aluminium hydroxide/expanded graphite synergistic effects on advancing flame retardancy, mechanical structure and thermal management of octadecanoic acid and octadecanol-based eutectic phase change materials

Shape stabilization, thermal energy storage behavior and thermal conductivity enhancement of flexible paraffin/MWCNTs/PP hollow fiber membrane composite phase change materials

PEG-based polyurethane/ Paraffin@SiO2/ Boron nitride phase change composite with efficient thermal conductive pathways and superior mechanical property