Abstract:It is well known that grain refiner additions in aluminum melts significantly reduce the filtration efficiency of ceramic foam filters (CFF). However, the mechanism remains unclear. In this work, the influence of grain refiners on the wettability of alumina substrate by aluminum melt was studied by both conventional sessile drop and improved sessile drop methods at different temperatures and vacuums. Commercial purity aluminum (CP-Al) and grain refiner master alloys Al-3Ti-1B, Al-5Ti-1B, Al-3Ti-0.15C were used. It is found that master alloy melts wet alumina substrate better than CP-Al. Generally, a lower temperature or lower vacuum results in a higher contact angle. The roles of grain refiner particles in improving the wettability were studied by analyzing the solidification structure of post wetting-test droplets using SEM. Strong sedimentation of grain refiner particles at the metal-substrate interface was observed, which is attributed to the higher density of grain refiner particles compared to the Al melt. Meanwhile, a large fraction of grain refiner particles agglomerates at the oxide skin of the aluminum droplets, showing a strong adhesion between the particles and oxide skin. Such adhering of grain refiner particles is proposed to enhance the rupture of the original oxide skin of the droplets and slow down the reoxidation process at the surface layer. Both adherence of grain refiner particles to surface oxide skin and sedimentation of particles at the metal-substrate interface are responsible for the wetting improvement.

Study of grain size and polishing performance of aluminum film as metal gate electrode

The Role of EDTA-2K in the Chemical Mechanical Polishing of Aluminum

Crystallographic Orientation Dependence of Nanopattern Morphology and Size in Electropolished Polycrystalline and Monocrystalline Aluminum: An EBSD and SEM Study

On the Effect of Randomly Oriented Grain Growth on the Structure of Aluminum Thin Films Deposited via Magnetron Sputtering

Impact of Alumina Coatings on Aluminum-Induced Crystallization of Polycrystalline Silicon Films

Effect of Grain Size and Specimen Dimensions on Micro-Forming of High Purity Aluminum

Effect Of Silicon On Grain Refinement Of Aluminum Produced By Electrolysis

Influence of underlayer roughness on the properties of Sc0.4Al0.6N thin films prepared via sputter deposition

Influence of Grain Refiners on the Wettability of Al2O3 Substrate by Aluminum Melt

Research on the Chemical Mechanical Polishing Process of Aluminum Alloy Wafers with Acidic Slurry

Chemical Mechanical Polishing of Aluminum Alloys using Alumina-Based Slurry

Effect of Al Polishing Conditions on the Growth and Morphology of Porous Anodic Alumina Films

Role of Grain Boundary on the Growth Behavior of Anodic Film on Spark Plasma Sintered AA6061

Formation mechanism and photoelectric properties of Al2O3 film based on atomic layer deposition

Atomistic Insights into Aluminum Doping Effect on Surface Roughness of Deposited Ultra-Thin Silver Films

Effect of Grain Size on the Mechanical Properties and Formability of AA8021 Aluminum Foil

Preparation of Polycrystalline Silicon of 100μm Size Large Grain Thin Films by Metal Induced Crystallization

Deposition and field emission properties of highly crystallized silicon films on aluminum-coated polyethylene napthalate

Electrochemical mechanical polishing of 4H-SiC (0001) with different grinding stones

The Role Of Electric Current-Associated Free Energy And Forced Convection On Grain Refinement In Pure Aluminum Under Electropulsing

Size Effects in Internal Friction of Nanocrystalline Aluminum Films