Abstract:In this study, non-metallic materials of waste-printed circuit board powders (WPCBP) were successfully used as reinforcing filler to produce polypropylene (PP)-wood composites, and their effect on the weathering properties of PP composites were fully evaluated via oxidation induction time (OIT), attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry, vicat softening point (VST), scanning electron microscopy, and mechanical properties analysis. The OIT analysis confirmed that the anti-thermal oxidative aging properties of PP-wood composites were decreased with the loading of WPCBP. Apart from that, the PP composite, reinforced with 30 wt.% of WPCBP, exhibited the highest value of active energy, which suggests that it is more sensitive to temperature and oxygen when compared with other PP composites. The mechanical properties analysis revealed that neat PP exhibited the poorest weathering properties after being subjected to UV exposure, and its retention rate of tensile strength and notched impact strength were only 70.6% and 59.6%, respectively, while WPCBP and wood flour (WF) could efficiently improve the retention rates of the mechanical properties of the PP composites when subjected to UV exposure. The visual appearance of the PP composites after being subjected to UV exposure showed more and smaller cracks with the loading of WPCBP and WF. The ATR-FTIR results revealed that the carbonyl index increased for all the weathered samples, and the more WPCBP was added into the PP composites led to a higher carbonyl index value, which might be due to the multivalent transition metals in WPCBP, which accelerate the photo-oxidation of the PP composites. The VST results show that both WPCBP and WF can effectively enhance the heat deformation resistance of the PP composites that have been subjected to UV exposure.

Effects of inorganic pigments on color and accelerated weathering of wheat straw fiber /polyvinyl chloride composites

A Comprehensive Study On The Accelerated Weathering Properties Of Polypropylene-Wood Composites With Non-Metallic Materials Of Waste-Printed Circuit Board Powders

Effects of Environmental Aging on the Durability of Wood-Flour Filled Recycled PET/PA6 Wood Plastic Composites

The Effect of ZnO Nanoparticles on Weathering Performance of Wood Plastic Composites

Performance Analysis of Four Plant Fiber/Polyvinyl Chloride Composites under Two Degradation Conditions with Water or Seawater with Xenon Lamp

Superficial analysis of different wood polymer composites exposed to artificial weathering

Improvement of weathering and thermal resistance of wood-plastic composites with iron oxide nanoparticles

Effect of antiaging agents on the outdoor natural weathering of bamboo powder/polypropylene foamed composites

STUDY ON PREPARATION AND PROPERTIES OF ANTI-ULTRAVIOLET AGING WOOD-PLASTIC COMPOSITES

Comparison of properties of wood-plastic composites based on alternate degradation in seawater and acid rain

Long-term outdoor weathering evaluation of wood plastic composites

Effects of Decoppering Pretreatment on Accelerated Weathering Behaviors of Waste Printed Circuit Boards Powders Reinforced Polypropylene Composites

Comparative study on weathering resistance of transparent wood infiltrated with three different polymers

Utjecaj prirodnog izlaganja vremenskim utjecajima na svojstva kompozita od drvnog brašna i recikliranog polipropilena

Effect of colorants on interfacial compatibility in wood flour/poly (β-hydroxybutyrate valerate) composites

Photoantioxidant Versus Photodegradant: Action of Nanoparticle Inorganic Fillers in Outdoor Aging of PP

Enhancing Insight into Photochemical Weathering of Flax and Miscanthus: Exploring Diverse Chemical Compositions and Composite Materials

Natural Aging of Reprocessed Polypropylene Composites Filled with Sustainable Corn Fibers

Hybrid Composites from Wheat Straw, Inorganic Filler, and Recycled Polypropylene: Morphology and Mechanical and Thermal Expansion Performance

Effect of natural weathering on optical properties of transparent wood composite

Aluminum silicate fibers reinforced wood-plastic composites: A strengthening strategy based on the interfacial interactions between inorganic fibers and organic agricultural wastes