Abstract:Wood–plastic recycled composite (WPRC) are composites obtained by heating and mixing the main raw material, wood flour, with thermoplastic resin, containing at least 40% by mass of recycled material in the raw material. In order to promote the multiple-recycling of WPRC to reduce greenhouse gas emissions and ensure the sustainability of resources, three types of WPRC decking materials with different exposure conditions (outdoor-exposed product, unexposed product and product stored in the factory for a long time) and samples after accelerated weathering tests (WPRC and recycled plastics from raw materials) were evaluated and compared by a TG-DTA in order to develop a method for evaluating the degree of degradation of used WPRC. Exothermic behavior with weight loss was observed in the temperature range of 30–500 °C for the WPRC product in two temperature ranges. In order to focus on the change in the first exotherm by oxidative degradation, where the rapid weight loss begins, this paper will focus on the exothermic behavior that develops in the temperature range of 150–300 °C on the lower temperature side. The results obtained are as follows. (1) Initial oxidation temperature (IOT) measurement from DTA behavior suggested that it is possible to evaluate the degree of degradation of WPRC. (2) On the exposed surface of WPRC exposed outdoors for more than 9 years and 8 months, significant decreases in the IOT were observed up to 1 mm from the surface, and a slight decrease in the IOT was observed between 1 and 2 mm from the surface. On the other hand, for the indoor long-term storage of 11 years and 6 months, there were almost no changes in the IOT with respect to the depth from the surface. Regarding the outdoor long-term-exposed WPRC, significant decreases in the IOT were observed not only on the exposed surface but also on the hollow and ribbed surfaces up to a depth of 1 mm from the surfaces. (3) A similar decrease in the IOT with increasing accelerated degradation time was observed for the WPRC and raw recycled plastic samples after accelerated weathering tests as for outdoor exposure. Furthermore, FTIR-ATR spectra also revealed that accelerated degradation caused oxidative degradation of the plastic. Therefore, it is thought that the decrease in the IOT can be used as an indicator to evaluate the degree of degradation of the plastic raw material in WPRC.

Effects of Environmental Aging on the Durability of Wood-Flour Filled Recycled PET/PA6 Wood Plastic Composites

A Comprehensive Study On The Accelerated Weathering Properties Of Polypropylene-Wood Composites With Non-Metallic Materials Of Waste-Printed Circuit Board Powders

Effect of Heat Oxygen Aging on Mechanical Properties and Heat Resistance of Wood Rubber Plastic Ternary Composites

STUDY ON PREPARATION AND PROPERTIES OF ANTI-ULTRAVIOLET AGING WOOD-PLASTIC COMPOSITES

Investigations on ageing of wood-plastic composites for outdoor applications: A meta-analysis using empiric data derived from diverse weathering trials

Green Composites Based on Unsaturated Polyester Resin from Recycled Poly(Ethylene Terephthalate) with Wood Flour as Filler—Synthesis, Characterization and Aging Effect

Effect of antiaging agents on the outdoor natural weathering of bamboo powder/polypropylene foamed composites

Effect of wood flour and compatibilizer content on the properties of wood-plastic composites

Long-term outdoor weathering evaluation of wood plastic composites

Possibility of using municipal solid waste for manufacturing wood-plastic composites: effects of natural weathering, wood waste types, and contents

Durability of High-Density Polyethylene (HDPE)- and Polypropylene (PP)-Based Wood-Plastic Composites—Part 1: Mechanical Properties of the Composite Materials

Multiple Recycling of Wood–Plastic Recycled Composite (WPRC): Developing a Method to Evaluate the Degree of Degradation of Used WPRC

Study of the influence of accelerated aging on the physical and mechanical properties of polymer composites containing rubber, polyethylene and poly(ethylene terephthalate) waste

Evaluating fresh and hardened properties of mortar composite with different types of modified polyethylene terephthalate (PET) materials as additives: Modification effects, surface properties, shape factors

Termite and decay resistance of bioplast-spruce green wood-plastic composites

Effect of Chemical Modification on Mechanical Properties of Wood-Plastic Composite Injection-Molded Parts

The Influence of Environmentally Friendly Plasticizer on the Bio-Durability of Wood Plastic Composites

Effects of Natural Fiber Waste, Content, and Coupling Agent on the Physical and Mechanical Properties of Wood Species–Plastic Composites as Green Materials

Fabrication of flame‐retardant wood plastic composites based on wasted bean dregs with recycled <scp>PE</scp> via mechanochemical crosslinking

Storage Life of Particle-Filled Polymer Composites Considering Aging Effects

Effects of inorganic pigments on color and accelerated weathering of wheat straw fiber /polyvinyl chloride composites