Abstract:Polymer nanocomposites have attracted great attention because of the demand for polymer materials with high performance and high functionality at the same time. Nano CaCO3 and SiO2 can be used to improve the rigidity of polypropylene (PP), which is quite importance for biaxial orientation PP film. However, the effect of these nano fillers on natural photo-oxidation degradation of PP has not been studied. In the present paper, the natural photo-oxidation profiles along the depth of PP and PP nanocomposites bars were studied with infrared microscope (IM) as well as polarizing lighu microscope (PLM) and scanning electron microscope (SEM). The results indicated that nano CaCO3 and SiO2, especially the latter, accelerated the oxidation rate of PP significantly, with more and deeper surface cracks. Larger amount of nano filler gave rise to greater oxidation degradation. The existence of nano CaCO3 and SiO2 helped to diminish the spherulite and broaden the transition region from amorphous to crystal The oxidation development along the depth in PP nanocomposites depended on the diffusion rate of oxygen and underwent two stages. In the first stage, the oxidation degree increased with time because of the low density in the transition region. In the layer under this region, the oxidation is difficult to occur owing to the high density of crystals and oxygen starvation. Therefore, the oxidation depth profiles decreased to near zero at nearly the same depth--about 200 microm from the exposed surface, corresponding to the transition region in PLM observation, namely surface oxidation layer. The high degree of oxidation in the surface layer gave rise to crack formation, and these surface cracks helped further oxidation in PP nanocomposites. In the second stage, the interconnection of surface cracks resulted in the fracture of the seriously oxidized surface oxidation layer. Consequently, the oxidation of the subsurface layer began and the depth profile developed to deeper place. In PP, the much thinner surface amorphous layer and the relatively perfect crystallization under it were responsible for the higher stability during the natural exposure.

Photoantioxidant Versus Photodegradant: Action of Nanoparticle Inorganic Fillers in Outdoor Aging of PP

Natural Photo-Aging Degradation of Polypropylene Nanocomposites

Interfacial Effects on Photooxidative Aging of Silica-Filled Polypropylene Composites

Effect of Alkylated Surface Modified Silica Nanoparticles on Degradation Products of PP During Photooxidation Aging: A Py-GC-MS Analysis

[Study on Natural Photo-Oxidation Degradation of Polypropylene Nanocomposites by Infrared Microscopy].

Disappearance Of The Filleran Interesting Interfacial Evolution During The Photooxidative Aging Of Polypropylene Composites

Effects of inorganic fillers on the natural photo-oxidation of high-density polyethylene

Effect of antiaging agents on the outdoor natural weathering of bamboo powder/polypropylene foamed composites

Influence of organic and inorganic fillers on the photoaging behavior of polyolefins

Interfacial Effect on Photo oxidation of PP/CaCO3 Composites

Thermal Aging of Polypropylene Nanocomposites

Simulation of natural aging property of microplastics in Yangtze River water samples via a rooftop exposure protocol

A Comprehensive Study On The Accelerated Weathering Properties Of Polypropylene-Wood Composites With Non-Metallic Materials Of Waste-Printed Circuit Board Powders

Photo- and Thermo-Oxidative Aging of Polypropylene Filled with Surface Modified Fumed Nanosilica

A rapid and highly sensitive evaluation of polymer composite aging with linear correlation to real-time aging

Research on the Aging Mechanism of Polypropylene Nonwoven Geotextiles under Simulated Heavy Metal Aging Scenarios

STUDY ON AGEING RESISTANCE OF POLYPROPYLENE/NANO-SCALE RUTILE TITANIUM DIOXIDE/POE POLYOLEFIN ELASTOMER COMPOSITES

The Mechanism for Inorganic Fillers Accelerating and Inhibiting the UV Irradiation Aging Behaviors of Rigid Poly(vinyl Chloride)

In Situ Observation of Polypropylene Composites Reinforced by Nonmetals Recycled from Waste Printed Circuit Boards During Tensile Testing

Antioxidant Behaviour of a Nanosilica-Immobilized Antioxidant in Polypropylene

Study On The Effect Of Nano-Zno As Photo Aging Stabilizer In Ldpe Insulation