Abstract:Polymer nanocomposites have attracted great attention because of the demand for polymer materials with high performance and high functionality at the same time. Nano CaCO3 and SiO2 can be used to improve the rigidity of polypropylene (PP), which is quite importance for biaxial orientation PP film. However, the effect of these nano fillers on natural photo-oxidation degradation of PP has not been studied. In the present paper, the natural photo-oxidation profiles along the depth of PP and PP nanocomposites bars were studied with infrared microscope (IM) as well as polarizing lighu microscope (PLM) and scanning electron microscope (SEM). The results indicated that nano CaCO3 and SiO2, especially the latter, accelerated the oxidation rate of PP significantly, with more and deeper surface cracks. Larger amount of nano filler gave rise to greater oxidation degradation. The existence of nano CaCO3 and SiO2 helped to diminish the spherulite and broaden the transition region from amorphous to crystal The oxidation development along the depth in PP nanocomposites depended on the diffusion rate of oxygen and underwent two stages. In the first stage, the oxidation degree increased with time because of the low density in the transition region. In the layer under this region, the oxidation is difficult to occur owing to the high density of crystals and oxygen starvation. Therefore, the oxidation depth profiles decreased to near zero at nearly the same depth--about 200 microm from the exposed surface, corresponding to the transition region in PLM observation, namely surface oxidation layer. The high degree of oxidation in the surface layer gave rise to crack formation, and these surface cracks helped further oxidation in PP nanocomposites. In the second stage, the interconnection of surface cracks resulted in the fracture of the seriously oxidized surface oxidation layer. Consequently, the oxidation of the subsurface layer began and the depth profile developed to deeper place. In PP, the much thinner surface amorphous layer and the relatively perfect crystallization under it were responsible for the higher stability during the natural exposure.

Effect of Alkylated Surface Modified Silica Nanoparticles on Degradation Products of PP During Photooxidation Aging: A Py-GC-MS Analysis

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Photo- and Thermo-Oxidative Aging of Polypropylene Filled with Surface Modified Fumed Nanosilica

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

Interfacial Effects on Photooxidative Aging of Silica-Filled Polypropylene Composites

Natural Photo-Aging Degradation of Polypropylene Nanocomposites

Photoantioxidant Versus Photodegradant: Action of Nanoparticle Inorganic Fillers in Outdoor Aging of PP

[Study on Natural Photo-Oxidation Degradation of Polypropylene Nanocomposites by Infrared Microscopy].

Antioxidant Behaviour of a Nanosilica-Immobilized Antioxidant in Polypropylene

Deterioration of polypropylene/silicon dioxide nanocomposites before oxidative degradation

Oxidative Degradation Products Analysis of Polymer Materials by Pyrolysis Gas Chromatography–mass Spectrometry

Anti-aging Behavior of Amino-Containing Co-Condensed Nanosilica in Polyethylene

Preparation of Nanosilica-Immobilized Antioxidant and the Antioxidative Behavior in Low Density Polyethylene

Thermal-Oxidative Effect of A Co-Condensed Nanosilica-Based Antioxidant in Polypropylene

Effects of inorganic fillers on the natural photo-oxidation of high-density polyethylene

Adsorption-desorption Effect on Physical Aging in PMMA-silica Nanocomposites

Effects of surface modification of nano-silica on the thermal degradation and combustion Behaviors of LLDPE

Interfacial effect on photo-oxidation of PP via model blends

Study on the Effects of Nucleating Agents on Photooxidation Degradation of Pp by Ftir and Im

Photocatalytic aging process of Nano-TiO2 coated polypropylene microplastics: Combining atomic force microscopy and infrared spectroscopy (AFM-IR) for nanoscale chemical characterization

Interfacial Effect on Photo oxidation of PP/CaCO3 Composites