Abstract:Polymer nanocomposites have attracted great attention because of the demand for polymer materials with high performance and high functionality at the same time. Nano CaCO3 and SiO2 can be used to improve the rigidity of polypropylene (PP), which is quite importance for biaxial orientation PP film. However, the effect of these nano fillers on natural photo-oxidation degradation of PP has not been studied. In the present paper, the natural photo-oxidation profiles along the depth of PP and PP nanocomposites bars were studied with infrared microscope (IM) as well as polarizing lighu microscope (PLM) and scanning electron microscope (SEM). The results indicated that nano CaCO3 and SiO2, especially the latter, accelerated the oxidation rate of PP significantly, with more and deeper surface cracks. Larger amount of nano filler gave rise to greater oxidation degradation. The existence of nano CaCO3 and SiO2 helped to diminish the spherulite and broaden the transition region from amorphous to crystal The oxidation development along the depth in PP nanocomposites depended on the diffusion rate of oxygen and underwent two stages. In the first stage, the oxidation degree increased with time because of the low density in the transition region. In the layer under this region, the oxidation is difficult to occur owing to the high density of crystals and oxygen starvation. Therefore, the oxidation depth profiles decreased to near zero at nearly the same depth--about 200 microm from the exposed surface, corresponding to the transition region in PLM observation, namely surface oxidation layer. The high degree of oxidation in the surface layer gave rise to crack formation, and these surface cracks helped further oxidation in PP nanocomposites. In the second stage, the interconnection of surface cracks resulted in the fracture of the seriously oxidized surface oxidation layer. Consequently, the oxidation of the subsurface layer began and the depth profile developed to deeper place. In PP, the much thinner surface amorphous layer and the relatively perfect crystallization under it were responsible for the higher stability during the natural exposure.

Antioxidant Behaviour of a Nanosilica-Immobilized Antioxidant in Polypropylene

Effect of Nano-Tio2 Immobilized Antioxidant on Ageing Resistance Behavior of Thermoplastic Vulcanizate Exposed to UV/O3

Hindered phenol grafted carbon nanotubes for enhanced thermal oxidative stability of polyethylene

Influence of Wall Number and Surface Functionalization of Carbon Nanotubes on Their Antioxidant Behavior in High Density Polyethylene

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Effect of Alkylated Surface Modified Silica Nanoparticles on Degradation Products of PP During Photooxidation Aging: A Py-GC-MS Analysis

Antioxidant Behavior of A Novel Sulfur-Bearing Hindered Phenolic Antioxidant with A High Molecular Weight in Polypropylene

Isothermal crystallization of polypropylene/surface modified silica nanocomposites

Double-hindered phenolic SiO 2 composites with excellent oxidation resistance and thermal stability for enhanced thermal oxidation stability of PPS

Deterioration of polypropylene/silicon dioxide nanocomposites before oxidative degradation

Crystallization and Mechanical Properties of Polypropylene Filled with Sio2 Nanoparticles

Modification of mechanical and color properties of polypropylene with colored nano‐SiO<sub>2</sub> prepared from diatomite

Interfacial Effects on Photooxidative Aging of Silica-Filled Polypropylene Composites

Modification Of Mechanical And Color Properties Of Polypropylene With Colored Nano-Sio2 Prepared From Diatomite

[Study on Natural Photo-Oxidation Degradation of Polypropylene Nanocomposites by Infrared Microscopy].

Physicochemical and antimicrobial characteristics of polypropylene-based nanocomposite containing SiO2-Ag nanoparticles prepared by gamma irradiation

Synthesis of A Novel Sulfur-Bearing Secondary Antioxidant with A High Molecular Weight and Its Comparative Study on Antioxidant Behavior in Polypropylene with Two Commercial Sulfur-Bearing Secondary Antioxidants Having Relatively Low Molecular Weight

Increasing Polypropylene High Temperature Stability By Blending Polypropylene-Bonded Hindered Phenol Antioxidant

Bio‐based and effective: Cardanol‐piperidine derivatives for enhanced polypropylene resistance against thermo‐ and photo‐oxidative aging

Antimigration Polypropylene Antioxidants: A Review

Photoantioxidant Versus Photodegradant: Action of Nanoparticle Inorganic Fillers in Outdoor Aging of PP