Abstract:The defect-induced laser damage on mechanically machined fused silica optical surfaces under intense laser irradiation severely threatens the laser damage resistance of optical components. The lack of a quantitative relationship between the feature information of surface defects and the laser-induced damage thresholds (LIDTs) of optical surfaces poses a challenge to effectively evaluate the influence of the surface defects on the LIDTs of optical surfaces. Herein, the photoluminescence (PL) properties of the areas where laser damage tends to occur in surface-defect zones are explored. The PL induced by the point defects at the atomic scale in these areas is found to be obviously higher than that of other positions. The PL envelope area (S) at the position with the highest PL intensity among the whole surface defect is found to be inversely proportional to the LIDT (Φ) of the optical surface for the first time (SΦ = N0). It is beneficial to quantitatively characterize the influence of the surface defect and provide new insights in elucidating the defect-induced laser damage mechanisms. Besides, we found that there is a minimum LIDT for the mechanically machined optical surfaces with various surface defects. On basis of this, the maximum influence of the surface defects with different species on the LIDTs of optical surfaces could be determined. Based on the constructed relationship (SΦ = N0) and the developed MD model, two causes of the minimum LIDT are determined. The PL envelope area of the surface defect would slightly affect the LIDT when the PL envelope area is large enough, which is the first cause. The mechanical force could compact the optical surface, increasing the densities of Si and O atoms. However, the densities of Si and O atoms become stable when the mechanical force is large enough, causing the highest densities of point defects, which is the second cause.

Effect of Etching Morphology of Artificial Defect on Laser-Induced Damage Properties under 355 Nm Laser Irradiation.

Effect of Etching on the Laser-Induced Damage Properties of Artificial Defects under 1064-Nm Laser Irradiation

Characterization of artificial indentation defects in fused silica surface and its damage performance under 355 nm nanosecond laser

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Influence of Subsurface Defects on 355 Nm Laser Damage Resistance of Monolayer and Multilayer Coatings

Morphology and Growth Properties of Nano- and Submicrometer-Scale Initial Damage Sites under 355 Nm Wavelength Pulsed Laser Irradiation.

Influence of Surface Damage on the Optical Properties of Sapphire and Its Etching Repair Method

Effect of Polishing-Induced Subsurface Impurity Defects on Laser Damage Resistance of Fused Silica Optics and Their Removal with Hf Acid Etching

Defect-driven laser-induced damage in optical coatings

Laser Modulation Simulation of Micro-Crack Morphology Evolution During Chemical Etching

Investigation of Grinding and Lapping Surface Damage Evolution of Fused Silica by Inductively Coupled Plasma Etching

Effect of Micro-Crack and Reaction Product on Laser Damage Performance of Optical Glass During Chemical Etching

Relationship Between the Photoluminescence Envelope Area of Surface Defects and the Laser-Induced Damage Thresholds of Mechanically Machined Fused Silica Optical Surfaces

Surface Molecular Structure Defects and Laser-Induced Damage Threshold of Fused Silica During a Manufacturing Process

Evolution of Point Defects in Mechanical Cracks of Fused Silica after CO2 Laser Melting

Detailed Near-Surface Nanoscale Damage Precursor Measurement and Characterization of Fused Silica Optics Assisted by Ion Beam Etching

Effects of Wet Chemical Etching on Scratch Morphology and Laser Damage Resistance of Fused Silica

Study of micron-scale defects in optical coatings for high-power lasers deposited by ion beam sputtering

Effect of ion beam etching on surface/subsurface structural defect evolution in fused silica optics

Study For Improvement Of Laser Induced Damage Of 1064 Nm Ar Coatings In Nanosecond Pulse

Evolution of the Point Defects Involved under the Action of Mechanical Forces on Mechanically Machined Fused Silica Surfaces