Abstract:A chemical sensor for gas phase measurements is reported which combines the principles of chemical separation and fiber optic detection. The analyzer incorporates an annular column Chromatographic sensor, constructed by inserting a polymer-clad optical fiber into a silica capillary. Light from a helium-neon laser is launched down the fiber, producing a steady intensity distribution within the fiber, but a low background of scattered light. When sample vapor is introduced to the sensor, and an analyte-rich volume interacts with the polymer cladding, Chromatographic retention is observed simultaneously with a change in the local refractive index of the cladding. An increase in cladding refractive index (RI) causes light to be coupled out of the fiber, with detection at a right-angle to the annular column length to provide optimum S/N ratio. This detection mechanism is called mode-filtered light detection. We report a gas Chromatographic separation on a 3.1 m annular column (320 microm i.d. silica tube, 228 microm o.d. fiber with a 12 microm fluorinated silicone clad) of methane, benzene, butanone and chlorobenzene in 6 min. The annular column length was reduced to 22 cm to function as a sensor, with selected organic vapors exhibiting unique retention times and detection selectivity. The detection selectivity is determined by the analyte RI and the partition coefficient into the cladding. The calculated limit of detection (LOD) for benzene vapor is 0.03% by volume in nitrogen, and several chlorinated species had LOD values less than 1%. For binary mixtures of organic vapors, the detected response appears to be the linear combination of the two organic standards, suggesting that the annular column may be useful as a general approach for designing chemical sensors that incorporate separation and optical detection principles simultaneously.

Gas-self-filter-based Erbium-Doped Fiber Loop Laser for Gas Detection

An erbium-doped fiber laser for gas sensing using an optical interference C 2H 2 gas filter

Measurement of Gas Concentration by Wavelength Shift Method with an EDFA Fiber Laser Loop

Multiple Gas Detection Using V-cavity Coupled Diode Laser

Using of the Gas Absorption Spectrum As Band-Stop Filter in a EDFA Fiber Loop Laser

Dual-Wavelength Mid-Infrared Laser for Long-Range Gas Detection(Invited)

Stable Multi-Wavelength Erbium-Doped Fiber Laser Based on Dispersion-Shifted Fiber and Sagnac Loop Filter

Multi-point, fiber-optic gas detection with intra-cavity spectroscopy

Precise Gas Temperature Measurement Using a Single Dual-Wavelength Mode-Locked Fiber Laser

Gas Concentration Sensing Based on Fiber Loop Ring-Down Spectroscopy: A Review

Mode-phase-difference photothermal spectroscopy for gas detection with an anti-resonant hollow-core optical fiber

Acousto-Optic Q-Switched Fiber Laser-Based Intra-Cavity Photoacoustic Spectroscopy for Trace Gas Detection

Intra-Cavity Absorption Gas Measurement Network Based on the Fiber Lasers

A dual-wavelength erbium-doped fiber laser for high resolution strain sensing with compound filter of a Sagnac loop and a long period fiber grating

Swept-wavelength mid-infrared fiber laser for real-time ammonia gas sensing

Hollow waveguide CO2 laser sensing system for rapid detection of trace sulfur hexafluoride (SF6) gas

Frequency-modulated continuous-wave multiplexed gas sensing based on optical frequency comb calibration

External-Cavity Quantum Cascade Laser-Based Gas Sensor for Sulfur Hexafluoride Detection

In Situ All-Fiber Remote Gas Sensing Strategy Based on Anti-Resonant Hollow-Core Fiber and Middle-Hole Eccentric-Core Fiber

Cavity ring-down spectroscopy with a laser frequency stabilized and locked to a reference target gas absorption for drift-free accurate gas sensing measurements

Gas chromatographic sensing on an optical fiber by mode-filtered light detection