In Situ All-Fiber Remote Gas Sensing Strategy Based on Anti-Resonant Hollow-Core Fiber and Middle-Hole Eccentric-Core Fiber

Yuhan Geng,Tie Zhang,Shengnan Wu,Sailing He
DOI: https://doi.org/10.3390/photonics11040301
IF: 2.536
2024-03-27
Photonics
Abstract:Laser absorption spectroscopy for gas sensing basically employs an air pump located at the gas cell probe to draw in ambient gases, and the on-site gas sample is subsequently delivered for laboratory non-real-time analysis. In this study, an in situ all-fiber remote gas sensing strategy is proposed. The anti-resonant hollow-core fiber (AR-HCF) is used as the sensing fiber, and a 20 m middle-hole eccentric-core fiber (MH-ECF) is used as the conducting fiber. The remote ambient gases can be inhaled into the AR-HCF as a result of the negative pressure transmitted through the MH-ECF when pumping gas at the interface of the MH-ECF. Since the real-time monitoring of greenhouse gas emissions in industrial processes holds immense significance in addressing global climate change, the detection of CO2 is achieved with the TDLAS-WMS method, and the gas sensing performance of an all-fiber remote gas sensing structure (RGS) is experimentally validated. The response time t90 under the pumping condition is about 456 s, which is about 30 times faster than that of free diffusion. Allan deviation results for more than one hour of continuous monitoring indicate that the lowest detection limit for the all-fiber RGS is 0.0373% when the integration time is 184 s. The all-fiber remote gas sensing strategy also possesses the benefits of being applicable to multiplex, hazardous gas environment passive monitoring.
optics
What problem does this paper attempt to address?
The paper aims to address the issues of real-time monitoring and flexible stability in remote gas sensing. Specifically, it proposes an all-fiber remote gas sensing strategy based on anti-resonance hollow-core fiber (AR-HCF) and mid-hole eccentric core fiber (MH-ECF). This novel approach utilizes MH-ECF to transmit negative pressure, allowing the remote environmental gas to be drawn into the AR-HCF for detection. Given the significant importance of real-time monitoring of greenhouse gas emissions in industrial processes for global climate change, the paper employs tunable diode laser absorption spectroscopy combined with wavelength modulation technology (TDLAS-WMS) to detect carbon dioxide (CO₂). Experimental results show that under pumping conditions, the sensor's response time (t90) is approximately 456 seconds, which is about 30 times faster than free diffusion. The Allan variance results for continuous monitoring over more than 1 hour indicate that when the integration time is 184 seconds, the minimum detection limit of the all-fiber remote gas sensing structure (RGS) is 0.0373%. Additionally, this all-fiber remote gas sensing strategy has the advantages of being suitable for multiplexing and passive monitoring in hazardous gas environments.