Abstract:A single dual-wavelength comb fiber laser was designed to emit simultaneously two asynchronous ultrashort pulse sequences for gas temperature detection. The interpulse coherence can be easily realized by sharing the same cavity and experiencing the same environment, and complicated feedback control is no longer required. The asynchronous pulses yield an optical sampling for interferogram in the time domain. A heatable cell filled with acetylene and nitrogen was used as the target object. The absorption spectrum of acetylene from 6492.52 to 6496.4 cm-1 was obtained by performing fast Fourier transform (FFT) on the phase-corrected interferograms. The standard deviation (STD) of the residual error between the measured spectra and HITRAN database was within 0.01. A baseline-immune multispectral fitting method for gas absorption estimation was proposed to enable precise temperature calculation. Simulation results demonstrate that compared with two classical methods, i.e., the frequency-domain (FD) multispectral fitting method and time-domain (TD) molecular free-induction decay (mFID) method, the proposed method shows a higher accuracy of gas temperature and concentration measurement and is applicable to various baseline types and noises. In the experiment, compared with the two classical methods, the maximum relative error between the measured and reference temperatures of the proposed method was reduced to 3.2%. Simulation and experiment results verify that the proposed method yields higher accuracy and noise immunity than the two classical methods.

Multi-point, fiber-optic gas detection with intra-cavity spectroscopy

Multiple Gas Detection Using V-cavity Coupled Diode Laser

Acousto-Optic Q-Switched Fiber Laser-Based Intra-Cavity Photoacoustic Spectroscopy for Trace Gas Detection

Gas/liquid Detection System Based on Intra-Cavity Absorption Spectroscopy and Tilted Fiber Bragg Grating

Remote Multipoint Fiber Optic Gas Sensors Using an Fmcw Technique and A Tunable Laser

Intra-Cavity Absorption Gas Measurement Network Based on the Fiber Lasers

A fiber Fabry-Perot cavity based spectroscopic gas sensor

Gas detection using cavity-enhanced Raman spectroscopy with a bidirectional multi-pass cell and polarization beam-splitting optical path

Detection of Gas Concentration by Correlation Spectroscopy Using A Multi-Wavelength Fiber Laser

Multiplexed Photonic Crystal Fiber Gas-Sensing Network Based on Intracavity Absorption

Mode-phase-difference photothermal spectroscopy for gas detection with an anti-resonant hollow-core optical fiber

1650-nm-band Tunable V-Cavity Semiconductor Laser

Dual-Wavelength Mid-Infrared Laser for Long-Range Gas Detection(Invited)

Fiber-Optic Acetylene Gas Sensor Based on Microstructured Optical Fiber Bragg Gratings

Precise Gas Temperature Measurement Using a Single Dual-Wavelength Mode-Locked Fiber Laser

Frequency-modulated continuous-wave multiplexed gas sensing based on optical frequency comb calibration

Optical Fiber Gases Sensing Array with Frequency Modulated Continuous Wave Technique

Ultra-wide range and wavelength fixed trace gas detection technology based on single chamber multiplexing

Numerical investigation of on-chip multi-gas sensing using a low-repetition-frequency microcavity Kerr comb with backward interference structure

Mid-Infrared Hollow-Core Bragg Fiber for Trace Gas Detection

Quantum cascade laser intracavity absorption spectrometer for trace gas sensing