Abstract:A chemical sensor for gas phase measurements is reported which combines the principles of chemical separation and fiber optic detection. The analyzer incorporates an annular column Chromatographic sensor, constructed by inserting a polymer-clad optical fiber into a silica capillary. Light from a helium-neon laser is launched down the fiber, producing a steady intensity distribution within the fiber, but a low background of scattered light. When sample vapor is introduced to the sensor, and an analyte-rich volume interacts with the polymer cladding, Chromatographic retention is observed simultaneously with a change in the local refractive index of the cladding. An increase in cladding refractive index (RI) causes light to be coupled out of the fiber, with detection at a right-angle to the annular column length to provide optimum S/N ratio. This detection mechanism is called mode-filtered light detection. We report a gas Chromatographic separation on a 3.1 m annular column (320 microm i.d. silica tube, 228 microm o.d. fiber with a 12 microm fluorinated silicone clad) of methane, benzene, butanone and chlorobenzene in 6 min. The annular column length was reduced to 22 cm to function as a sensor, with selected organic vapors exhibiting unique retention times and detection selectivity. The detection selectivity is determined by the analyte RI and the partition coefficient into the cladding. The calculated limit of detection (LOD) for benzene vapor is 0.03% by volume in nitrogen, and several chlorinated species had LOD values less than 1%. For binary mixtures of organic vapors, the detected response appears to be the linear combination of the two organic standards, suggesting that the annular column may be useful as a general approach for designing chemical sensors that incorporate separation and optical detection principles simultaneously.

An erbium-doped fiber laser for gas sensing using an optical interference C 2H 2 gas filter

Gas-self-filter-based Erbium-Doped Fiber Loop Laser for Gas Detection

Measurement of Gas Concentration by Wavelength Shift Method with an EDFA Fiber Laser Loop

Acousto-Optic Q-Switched Fiber Laser-Based Intra-Cavity Photoacoustic Spectroscopy for Trace Gas Detection

Precise Gas Temperature Measurement Using a Single Dual-Wavelength Mode-Locked Fiber Laser

Swept-wavelength mid-infrared fiber laser for real-time ammonia gas sensing

Part-per-Billion (Ppb)-Level Acetylene Sensor Employing Optical Quartz Enhanced Photoacoustic Spectroscopy (QEPAS) with an Erbium-Doped Fiber Amplifier (EDFA) and a Fiber-Optic Fabry–Perot Interferometer

Multiple Gas Detection Using V-cavity Coupled Diode Laser

Intra-Cavity Absorption Gas Measurement Network Based on the Fiber Lasers

Gas chromatographic sensing on an optical fiber by mode-filtered light detection

Single-frequency linear cavity erbium-doped fiber laser for fiber-optic sensing applications

Tellurite Hollow-Core Antiresonant Fiber-Coupled Quantum Cascade Laser Absorption Spectroscopy

Dual-Wavelength Mid-Infrared Laser for Long-Range Gas Detection(Invited)

Detection of Gas Concentration by Correlation Spectroscopy Using A Multi-Wavelength Fiber Laser

Near-Infrared Tunable Laser Absorption Spectroscopic Acetylene Sensor System Using a Novel Three Mirror-Based, Dense Pattern Gas Cell

Mode-phase-difference photothermal spectroscopy for gas detection with an anti-resonant hollow-core optical fiber

Multi-point, fiber-optic gas detection with intra-cavity spectroscopy

A fiber Fabry-Perot cavity based spectroscopic gas sensor

Frequency-Division-Multiplexed Multicomponent Gas Sensing with Photothermal Spectroscopy and a Single NIR/MIR Fiber-Optic Gas Cell

Widely Tunable Compact Erbium-Doped Fiber Ring Laser for Fiber-Optic Sensing Applications

Antiresonant Hollow-Core Fiber-Based Dual Gas Sensor for Detection of Methane and Carbon Dioxide in the Near- and Mid-Infrared Regions