Abstract:An attractive+ to graphene for a range of applications is graphene oxide (GO). GO is an insulator because of the hydroxyl, carboxyl, carbonyl and epoxide functional groups presenting on the basal surface or edge and becomes a semiconductor or semimetal as it is reduced back toward graphene. Here we demonstrate that graphene oxide can be reversibly reduced and oxidized in nanometer-scale by applying bias voltages by the nano-tip of conductive atomic force microscopy system. The low resistance state (LRS) when reduced and a high resistance state (HRS) when oxidized can be achieved under the opposite applied bias direction. The LRS (around 10 KΩ and HRS (around 40 M Ω) were stable for more than 103 s, and no obvious degradation was observed during the tests. Threshold voltages for reduction and oxidation, which can be considered as the set and reset voltages is around -6.5 V and +7 V, respectively. It is shown that the hydrogen (H+) ions and hydroxyl ions (OH-) dissociated from the water meniscus formed between the tip and GO in ambient condition at room temperature plays an essential role in the resistive memory switching. It is also found that the negative bias is responsible for the reduction, which is related the transition from HRS to LRS, and the positive bias is responsible for the oxidation, which is related the transition from LRS to HRS, respectively. Raman spectroscopy and X-ray photoelectron spectroscopy is performed to confirm this resistive memory switching behaviors.

Oxide Resistive Memory with Functionalized Graphene As Built-In Selector Element

Reversible Transition of Volatile to Non-Volatile Resistive Switching in Cu/SiNx/ZnO/Pt Memristor

Modeling and Simulation of Resistive Random Access Memory with Graphene Electrode

Oxide Heterostructure Resistive Memory.

Retention Behavior of Graphene Oxide Resistive Switching Memory on Flexible Substrate

Highly Improved Performance in Zr0.5Hf0.5O2 Films Inserted with Graphene Oxide Quantum Dots Layer for Resistive Switching Non-Volatile Memory

Resistive Switching: Breaking the Current‐Retention Dilemma in Cation‐Based Resistive Switching Devices Utilizing Graphene with Controlled Defects (Adv. Mater. 14/2018)

Electrode/Oxide Interface Engineering By Inserting Single-Layer Graphene: Application For Hfox-Based Resistive Random Access Memory

Graphene Oxide and Tio2 Nano-Particle Composite Based Nonvolatile Memory

Tetrahedral Amorphous Carbon Resistive Memories with Graphene-Based Electrodes

Dual‐Functional Nonvolatile and Volatile Memory in Resistively Switching Indium Tin Oxide/HfOx Devices

A Selector Device Based on Graphene–oxide Heterostructures for Memristor Crossbar Applications

The Nano-Scale Resistive Memory Effect of Graphene Oxide

Bipolar Resistive Switching in Al/GO-PEDOT:PSS/Pt Memory Devices

Dual-Functional Nonvolatile and Volatile Memory in Resistively Switching Indium Tin Oxide/HfO x Devices

Graphene oxide for nonvolatile memory application by using electrophoretic technique

Metal Oxide Resistive Memory using Graphene Edge Electrode

Functionalized Graphitic Carbon Nitride for Metal-free, Flexible and Rewritable Nonvolatile Memory Device Via Direct Laser-Writing

Single-Crystal Graphene-Directed Van Der Waals Epitaxial Resistive Switching

High performance of graphene oxide-doped silicon oxide-based resistance random access memory

Gate-controlled Non-Volatile Graphene-Ferroelectric Memory