Abstract:The clinical history of yttria-stabilized, zirconia (Zr) ceramic has been controversial. In the patient, combinations of hydrothermal and mechanical shocks may trigger detrimental changes in Zr balls that have inferior metastability. Transformations from tetragonal to monoclinic phase may be influenced by impingement, dislocation, and disassociation in certain patients. Hydrothermal stability was measured in Zr balls from four vendors by autoclave and mechanical models that included "cup-impingement," "abrasive" wear, and "3rd-body" wear. Standard simulator tests for polyethylene (PE) wear studies combined pristine and previously transformed Zr and were also used to test lubricant effects (Zr/Zr-serum, Zr/Zr-water, Zr/PE-water). For in-vivo comparisons we studied retrieved Zr balls at 1-15 years follow-up by laser interferometry, SEM, EDS, XRD, and Raman spectroscopy. We found that severe mechanical shock triggered local surface destruction but little transformation. In contrast, hydrothermal processes revealed 5-13% monoclinic by 7 h, increasing at a rate of 0.56%/h for 22-mm balls and 0.81%/h for 26-mm balls. The all-ceramic Zr/Zr bearings were very sensitive to lubrication mode, showing early catastrophic failure when run in water but surviving 20 million cycles when run with serum lubrication. Wear with Zr/PE combination did not trigger phase changes in water or serum but decreased the monoclinic content measured on previously transformed surfaces. Most retrieved Zr balls showed high transformation (30-85% monoclinic) but some showed no transformation. The ball areas with major monoclinic changes corresponded to PE contact, suggesting that tribological conditions under the cup were the trigger. This indicated that we understand little of the hydrothermal conditions operating under Zr/PE hip joints in-vivo. (c) 2007 Wiley Periodicals, Inc.

Kinetics and the role of off-stoichiometry in the environmentally driven phase transformation of commercially available zirconia femoral heads

Kinetics of the Phase Transformation of Non-HIPed Zirconia Femoral Heads

Evaluation of Phase Stability in Zirconia Femoral Heads from Different Manufacturers after in Vitro Testing or in Vivo Retrieval.

Fabrication of Submicron Tetragonal Polycrystalline ZrO2 by the Transformation of Micro Monoclinic ZrO2 under High Pressure

Reconciling in Vivo and in Vitro Kinetics of the Polymorphic Transformation in Zirconia-Toughened Alumina for Hip Joints: Ii. Theory

Mechanisms induced by transition metal contaminants and their effect on the hydrothermal stability of zirconia-containing bioceramics: an XPS study.

In Vitro Versus in Vivo Phase Instability of Zirconia-Toughened Alumina Femoral Heads: A Critical Comparative Assessment.

Environmental Stability and Residual Stresses in Zirconia Femoral Head for Total Hip Arthroplasty: in Vitro Aging Versus Retrieval Studies

Role of Grain Size Fluctuations on the Environmental Resistance of Alumina-Zirconia Composite in Comparison with Commercially Available Monolithic Zirconia Femoral Head

Atomic force microscopy study of the tetragonal to monoclinic transformation behaviour of silica doped yttria-stabilized zirconia

Modeling the aging kinetics of zirconia ceramics

On the Role of Oxygen Vacancies and Lattice Strain in the Tetragonal to Monoclinic Transformation in Alumina/zirconia Composites and Improved Environmental Stability

Raman and X-ray photoelectron spectroscopic characterizations of thermal stability of 3 mol% yttria stabilized zirconia ceramics

Isothermal Tetragonal-To-Monoclinic Phase Transformation In Y2o3-Partially Stabilized Zirconia: The Influence Of Grain Size

Possible triggers for phase transformation in zirconia hip balls.

Surface Topology of Advanced Alumina/Zirconia Composite Femoral Head As Compared with Commercial Femoral Heads Made of Monolithic Zirconia

Microstructural dependence of aging induced phase transformation in Y2O3 partially stabilized ZrO2 polycrystals

Nondestructive Inspection of Phase Transformation in Zirconia-Containing Hip Joints by Confocal Raman Spectroscopy

On the Kinetics and Impact of Tetragonal to Monoclinic Transformation in an Alumina/zirconia Composite for Arthroplasty Applications

Effects of Calcination Temperature on Grain Growth and Phase Transformation of Nano-Zirconia with Different Crystal Forms Prepared by Hydrothermal Method

A quantitative microscopic view on the gas‐phase‐dependent phase transformation from tetragonal to monoclinic ZrO2