Abstract:Statement of problem: Monolithic zirconia restorations are directly exposed to cyclic loads and temperature changes in the oral cavity after cementation. These stresses may reduce the long-term success of the material by causing uncontrolled phase transformations within the zirconia. Purpose: The purpose of this in vitro study was to evaluate the effect of mastication simulation and different measurement points on the phase transformation of posterior 3-unit monolithic zirconia partial fixed dental prostheses (FDPs) in the posterior region. Material and methods: Posterior 3-unit FDPs of monolithic yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP), including BruxZir Shaded (group B), FireZr (group F), and Upcera (group U) (n=10), were machined from presintered blocks. All specimens were exposed to mastication simulation (240 000 cycles/1.7 Hz/50 N). The monoclinic phase content was evaluated by X-ray diffraction (XRD). Phase transformation was measured at the mesial connector (group M), distal connector (group D), and pontic regions (group P) before and after mastication simulation. The relative monoclinic phase amount (Xm) was calculated for all specimens. The data were analyzed by ANOVA and post hoc tests (α=.05). Results: According to XRD analysis, Xm for all groups and regions showed higher results after aging than before aging (P<.05). Group B has the lowest Xm among the groups. Group B showed a statistically significant difference compared with both group F and group U (P<.05). There was no significant difference between group F and group U (P>.05). When the regions were evaluated regardless of brand and the groups were evaluated in terms of regions, no statistically significant difference was observed between connectors and the pontic region (P>.05). Conclusions: Mastication simulation causes an increase in the Xm. However, this increase was unlikely to be clinically significant. There may be differences in phase transformation depending on the contents of the brands and sintering procedures. Variations in the phase quantity were independent of the connector regions and pontic for FDPs.

Kinetics of the Phase Transformation of Non-HIPed Zirconia Femoral Heads

Zirconium niobium alloy femoral head in young and middle-aged recent treatment of total hip replacement

Does artificial aging correctly predict the long-term in-vivo degradation behavior in zirconia hip prostheses?

Transformation-induced plasticity in zirconia during tensile loading: A combined microscopy and synchrotron X-ray refraction study

The aging micromechanisms of alumina matrix composite (AMC) used in total hip arthroplasty

Ageing, Shocks and Wear Mechanisms in ZTA and the Long-Term Performance of Hip Joint Materials

Atomic force microscopy study of the tetragonal to monoclinic transformation behaviour of silica doped yttria-stabilized zirconia

Modeling the aging kinetics of zirconia ceramics

Evaluation of Phase Transformation and Mechanical Properties of Metastable Yttria-Stabilized Zirconia by Nanoindentation.

Phase transformation and incompatibility at grain boundaries in zirconia-based shape memory ceramics: a micromechanics-based simulation study

Effect of mastication simulation on the phase transformation of posterior 3-unit monolithic zirconia fixed dental prostheses

Zirconia ageing is related to total hip arthroplasty aseptic loosening. A study of 45 retrieved zirconia heads

Atomic force microscopy study of the surface degradation mechanisms of zirconia based ceramics

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Finite element modelling of shock-induced damages on ceramic hip prostheses

Quantitative phase analysis from X-ray diffraction in Y-TZP dental ceramics: a critical evaluation

Investigation of Phase Transformation and Fracture Pattern as a Result of Long-Term Chewing Simulation and Static Loading of Reduced-Diameter Zirconia Implants

Critical effect of cubic phase on aging in 3 mol% yttria-stabilized zirconia ceramics for hip replacement prosthesis

Wear and surface degradation of commercial ZTA femoral heads under boundary lubrication conditions

Tensor-resolved Raman spectroscopic analysis of wear-induced residual stress fields in long-term alumina hip-joint retrievals

Ceramic–Titanium Alloy Artificial Hip Joint Wear Simulation and Experimental Study