Abstract:The clinical history of yttria-stabilized, zirconia (Zr) ceramic has been controversial. In the patient, combinations of hydrothermal and mechanical shocks may trigger detrimental changes in Zr balls that have inferior metastability. Transformations from tetragonal to monoclinic phase may be influenced by impingement, dislocation, and disassociation in certain patients. Hydrothermal stability was measured in Zr balls from four vendors by autoclave and mechanical models that included "cup-impingement," "abrasive" wear, and "3rd-body" wear. Standard simulator tests for polyethylene (PE) wear studies combined pristine and previously transformed Zr and were also used to test lubricant effects (Zr/Zr-serum, Zr/Zr-water, Zr/PE-water). For in-vivo comparisons we studied retrieved Zr balls at 1-15 years follow-up by laser interferometry, SEM, EDS, XRD, and Raman spectroscopy. We found that severe mechanical shock triggered local surface destruction but little transformation. In contrast, hydrothermal processes revealed 5-13% monoclinic by 7 h, increasing at a rate of 0.56%/h for 22-mm balls and 0.81%/h for 26-mm balls. The all-ceramic Zr/Zr bearings were very sensitive to lubrication mode, showing early catastrophic failure when run in water but surviving 20 million cycles when run with serum lubrication. Wear with Zr/PE combination did not trigger phase changes in water or serum but decreased the monoclinic content measured on previously transformed surfaces. Most retrieved Zr balls showed high transformation (30-85% monoclinic) but some showed no transformation. The ball areas with major monoclinic changes corresponded to PE contact, suggesting that tribological conditions under the cup were the trigger. This indicated that we understand little of the hydrothermal conditions operating under Zr/PE hip joints in-vivo. (c) 2007 Wiley Periodicals, Inc.

Nondestructive Inspection of Phase Transformation in Zirconia-Containing Hip Joints by Confocal Raman Spectroscopy

Kinetics of the Phase Transformation of Non-HIPed Zirconia Femoral Heads

Spatially Resolved Raman Spectroscopy for In-Depth Non-Destructive Residual Stress and Phase Transformation Assessments in 3Y-TZP Bioceramics

Phase Transformation and Residual Stresses in Retrieved Zirconia Ball Implant

Evaluation of Phase Stability in Zirconia Femoral Heads from Different Manufacturers after in Vitro Testing or in Vivo Retrieval.

In Vitro Versus in Vivo Phase Instability of Zirconia-Toughened Alumina Femoral Heads: A Critical Comparative Assessment.

Raman Spectroscopic Analysis of Advanced Ceramic Composite for Hip Prosthesis

Transformation-induced plasticity in zirconia during tensile loading: A combined microscopy and synchrotron X-ray refraction study

Reconciling in Vivo and in Vitro Kinetics of the Polymorphic Transformation in Zirconia-Toughened Alumina for Hip Joints: Ii. Theory

Phase Stability and Fracture Toughness of Zirconia Toughened Alumina for Joint Replacement

Innovative Tribometer for in Situ Spectroscopic Analyses of Wear Mechanisms and Phase Transformation in Ceramic Femoral Heads.

Stoichiometry and Surface Stress Analyses in Advanced Alumina/Zirconia Composites for Hip Arthroplasty Applications

Possible triggers for phase transformation in zirconia hip balls.

Phase Transformation in the Surface Region of Zirconia and Doped Zirconia Detected by UV Raman Spectroscopy

TRANSITION METAL IONS ACCELERATE POLYMORPHIC PHASE TRANSFORMATION IN ZIRCONIA-TOUGHENED ALUMINA ARTIFICIAL HIP JOINTS: AN IN VITRO STUDY

Chemistry-Driven Structural Alterations in Short-Term Retrieved Ceramic-On-Metal Hip Implants: Evidence for in Vivo Incompatibility Between Ceramic and Metal Counterparts

Atomic force microscopy study of the tetragonal to monoclinic transformation behaviour of silica doped yttria-stabilized zirconia

Kinetics and the role of off-stoichiometry in the environmentally driven phase transformation of commercially available zirconia femoral heads

On the Kinetics and Impact of Tetragonal to Monoclinic Transformation in an Alumina/zirconia Composite for Arthroplasty Applications

Fluorescence Spectroscopic Analysis of Surface and Subsurface Residual Stress Fields in Alumina Hip Joints

On the Role of Oxygen Vacancies and Lattice Strain in the Tetragonal to Monoclinic Transformation in Alumina/zirconia Composites and Improved Environmental Stability