Abstract:The present work systematically investigates a new strategy for the functionalization of silica gel using alkyl silatrane chemistry instead of alkylsilanes for synthesis of chromatographic stationary phases. In this work, silica was chemically modified for further functionalization by a thiol-ene click reaction. Thus, 3-mercaptopropylsilatrane (MPS) was used which is capable to form self-assembled monolayers (SAM) on top of silanol surfaces in a controlled manner as previously shown for silicon wafers. The utility of this chemistry for stationary phase synthesis in liquid chromatography was not evaluated yet. Hence, silica surface modifications using MPS were studied in comparison to established 3-mercaptopropyltrimethoxysilane (MPTMS) chemistry. First, the employed elemental analysis method was validated and it showed excellent intra-day and inter-day precisions (typically less than 5% RSD). It could be shown that the reaction kinetics of MPS was roughly 35-times faster than with MPTMS. After 30 min reaction time with MPS, the thiol content reached 74% of the maximal coverage. Due to controlled chemistry with MPS, which does not lead to oligomeric siloxane network at the silica surface, the ligand coverage was lower. However, multiple silanization cycles with MPS led to a dense surface coverage (around 4 µmol m-2). 29Si cross polarization/magic angle spinning (CP/MAS) solid-state NMR revealed distinct T1/T2/T3 ratios for MPS and MPTMS materials with up to 80% T3 (indicative for trifunctional siloxane linkage) for MPS and around 20% T3 for MPTMS. This indicates a more homogeneous, thinner monolayer film of MPS on the silica surface, as compared to an irregular thick oligomeric siloxane network with MPTMS. Bonding of quinine carbamate as chiral selector afforded an efficient chiral stationary phase (CSP) for chromatographic enantiomer separation. Separation factors were comparable to MPTMS-bonded CSP, however, chromatographic efficiency was much better for the MPS-bonded CSP. H/u curves indicated a reduced mass transfer resistance by roughly factor 3 for MPS- compared to MPTMS-bonded CSP. This confirms better chromatographic performance of surfaces with homogeneous monolayer compared to network structures on the silica surface which suffer from poor stationary phase mass transfer.

Quantitative monomolecular coverage of barium glass by the silane coupling agent gamma-methacryloxypropyltrimethoxysilane]

Quantitative monomolecular coverage of barium glass by the silane coupling agent γ-methacryloxypropyltrimethoxysilane

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Study of Hydrolysis and Condensation Mechanisms of a Silane Coupling Agent Γ-Mps Used for Dental Composite Resin

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Silane reactivity and resin bond strength to lithium disilicate ceramic surfaces

Effect of filler surface-treatment on dynamic viscoelastic properties for PMVS/SiO2 composites

Characterization of Surface Interaction of Inorganic Fillers with Silane Coupling Agents

Effects of Surface Treatment Procedures on Bond Strength of Lithium Disilicate Glass Ceramic.

Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols

Arrangement of Monofunctional Silane Molecules on Silica Surfaces: Influence of Alkyl Chain Length, Head-Group Charge, and Surface Coverage, from Molecular Dynamics Simulations, X-ray Photoelectron Spectroscopy, and Fourier Transform Infrared Spectroscopy

[Quantitative Characterization of Adsorbed Bovine Serum Albumin on Modified Surfaces of Poly(ether Urethane) Materials Using ATR-FT-IR Spectroscopy].

Condensation and hydrophobicity of the surface hydroxyl groups between organosilane modified water glass and microsilica

Dispersion of γ-methacryloxypropyltrimethoxysilane-functionalized zirconia nanoparticles in UV-curable formulations and properties of their cured coatings

Surface of silicate glass exposed to water

Increasing Acid Concentration, Time and Using a Two-Part Silane Potentiates Bond Strength of Lithium Disilicate–Reinforced Glass Ceramic to Resin Composite: An Exploratory Laboratory Study

Two component silicone coating and its strengthening on the surface of organic glass.

Controllable organosilane monolayer density of surface bonding using silatranes for thiol functionalization of silica particles for liquid chromatography and validation of microanalytical method for elemental composition determination

De-Agglomeration and Dispersion Behavior of TiO2Nanoparticles in Organic Media Using 3-Methacryloxypropyltrimethoxysilane As a Surface Modifier

Influence of Surface Property of CaCO3 Fillers on Apparent Viscosity of Filled Polydimethylsiloxane

Study of Chemical Modification Onto the Surface of Nano-Sio2