Abstract:Purpose This paper aims to design the nano-titanium dioxide (TiO 2 ) coating system which has superhydrophilic property, self-cleaning mechanism and antifog property as well as strong adhesion on glass substrate. Design/methodology/approach Two hydrophilic materials have been used such as TiO 2 nanoparticles as fillers and hydrophilic copolymer, Pluronic F-127 by using simple sol–gel approach. The prepared solution was applied onto glass through dip- and spray-coating techniques and then left for drying at ambient temperature. Findings The nano-TiO 2 superhydrophilic coating has achieved the water contact angle of 4.9° ± 0.5°. The superhydrophilic coating showed great self-cleaning effect against concentrated syrup and methylene blue where thin layer of water washes the dirt contaminants away. The nano-TiO 2 coating exhibits great antifog performance that maintains high transparency of around 89% when the coated glass is placed above hot-fog vapor for 10 min. The fog droplets were condensed into water film which allowed the transmission of light through the glass. The strong adhesion of coated glass shows no total failure at scratch profile when impacted with scratch load of 500, 800 and 1,200 mN. Research limitations/implications Findings will be useful in the development of self-cleaning superhydrophilic coating that is applicable on building glass and photovoltaic panel. Practical implications The developed nano-TiO 2 coating is developed by the combination of hydrophilic organic copolymer–inorganic TiO 2 network to achieve great superhydrophilic property, optimum self-cleaning ability and supreme antifog performance. Social implications The findings will be useful for residents in building glass window where the application will reduce dust accumulation and keep the glass clean for longer period. Originality/value The synthesis of nano-TiO 2 superhydrophilic coating which can be sprayed on large glass panel and cured at ambient temperature.

Two component silicone coating and its strengthening on the surface of organic glass.

Optimizing the fabrication of abrasion-resistant and transparent organosilicon coating

Preparation and Research of Hydrophobic PDMS/Nano-SiO2 Modified SiO2 Coating

Preparation and properties of methacrylate crosslinked silica coating

PREPARATION AND PROPERTIES OF TRANSPARENT COATING FOR POLYACRYLATES COPOLYMER MODIFIED WITH ORGANOSILICON

Facile Synthesis of Solvent-Free and Mechanically Robust Coating with Self-Cleaning Property

THE ABRASION-RESISTANT FILM OF METHYLSILICONE MODIFIED BY BOEHMITE AND SILICA SOL

A UV-curable silicone acrylate anti-smudge coating containing tertiary amines and Ti with the ability to prevent oxygen inhibition

Durable self-cleaning nano-titanium dioxide superhydrophilic coating with anti-fog property

Surface‐modified Silica Nanoparticles for Reinforcement of PMMA

Organic-Inorganic Hybrid Film Modified with Silica and Alumina Sols by Sol-Gel Method

Research of High-hardness and Wear-resistant SiO2 Film Coating on Acrylic Substrates

Fabrication pentablock copolymer/silica hybrids as self-assembly coatings.

Preparation of Durable Hydrophobic and Antireflective Silica Coating

Organic/inorganic hybrids by linear PDMS and caged MA-POSS for coating

Facile fabricated transparent anti-smudge coating with high hardness and excellent flexibility from MTQ and branched silicone resins

PREPARATION OF TRANSPARENT ABRASION-RESISTANT ORGANIC-INORGANIC HYBRID FILM

Synthesis and comparison of two poly (methyl methacrylate-b-3-(trimethoxysilyl)propyl methacrylate)/SiO2 hybrids by "grafting-to" approach.

Fabrication of a robust zwitterionic coating on glass with anti-fogging, anti-frosting, self-cleaning and antibacterial properties via UV-induced grafting polymerization

Formulation of Thermally Cured Organic-Inorganic Superhydrophilic Coating for Antifogging Optical Application

Enhanced Adhesive and Mechanically Robust Silicone-Based Coating with Excellent Marine Anti-Fouling and Anti-Corrosion Performances