Abstract:High-concentration TiO2 suspension is favored by industry since it would effectively simplify the processing of coatings, benefiting energy and cost savings. However, achieving a dense TiO2 suspension with low viscosity and good dispersion remains a challenge due to the large particle size and high density of pigment-grade TiO2 particles (200–400 nm). In this work, we proposed high-concentration TiO2 suspensions with low viscosity and excellent storage stability by grafting copolymer nanospheres to TiO2. The TiO2 particles are isolated through the steric hindrance and electrostatic repulsion of PMS (P(MMA-MPS)) nanospheres which are synthesized by emulsion polymerization of methyl methacrylate (MMA) and γ-methacryloxypropyltrimethoxysilane (MPS). The TiO2 suspension modified by PMS of 90 nm exhibits the highest concentration in water (74 wt%) while maintaining the lowest viscosity (95 mPa·s at the shear rate of 200 r/s). Through thermal storage at 50 °C in 28 d, the concentrated TiO2-PMS suspensions demonstrated excellent stability without any noticeable decline in coating properties compared to pure TiO2. The coating film of TiO2-PMS-90 suspension exhibited the optimal contrast ratio (92.4 %) and gloss value (78.5 GU) after thermal storage. The 50 L macro production results of TiO2-PMS-90 coincided with the lab results which will favor larger scale-up production. This work presents a strategy to enhance the dispersion stability of TiO2 particles to obtain a high-concentration slurry with low viscosity and superior flowability, particularly suitable for waterborne coatings.

De-Agglomeration and Dispersion Behavior of TiO2Nanoparticles in Organic Media Using 3-Methacryloxypropyltrimethoxysilane As a Surface Modifier

Effect Of Surface Modification Of Titanium Dioxide On The Uv-C Aging Behavior Of Silicone Rubber

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Dispersion of γ-methacryloxypropyltrimethoxysilane-functionalized zirconia nanoparticles in UV-curable formulations and properties of their cured coatings

De-Agglomeration and Dispersion of Nano-Tio2 in an Agitator Bead Mill

Photodegradation of an Azo Dye Using Immobilized Nanoparticles of TiO2 Supported by Natural Porous Mineral.

In Situ Compatibilization of Polypropylene and Polystyrene-Grafted Nano-Sized TiO2 in the Presence of Friedel–Crafts Catalyst

Preparation of acrylate polymer/silica nanocomposite particles with high silica encapsulation efficiency via miniemulsion polymerization

EMULSION COPOLYMERIZATION MECHANISM OF 3-TRIMETHOXYSILYLPROPYL METHACRYLATE AND STYRENE

Dispersion and Stabilization of Photocatalytic TiO 2 Nanoparticles in Aqueous Suspension for Coatings Applications

Effect of the Agglomeration of Tio2 Nanoparticles on Their Photocatalytic Performance in the Aqueous Phase

De-aggregation of nano-TiO_2 soft agglomeration in aqueous medium

Instant dispersion of titanium dioxide in waterborne coatings by pinning polyacrylate nanospheres

Modification of Titanium Dioxide Nanoparticles with 3-(Trimethoxysilyl)propyl Methacrylate Silane Coupling Agent

High-concentration TiO2 suspension (>70 wt%) with low viscosity suitable for waterborne coatings

Dispersion of Titanium Oxide Nanoparticles in Aqueous Solution with Anionic Stabilizer via Ultrasonic Wave

Compatibilization of titanium dioxide powders with non-polar media : Adsorption of anionic surfactants and its influence on dispersion stability

Partition of 3-trimethoxysilyl propyl methacrylate in emulsion polymerization system

Formation of Nanoparticles in Solid-State Matrices: a Strategy for Bulk Transparent TiO2–polymer Nanocomposites

Polyisobutenylsuccinimide Derivatives： Synthesis and Their Application in the Dispersing of TiO2 Nanoparticles

Phase Separation and Properties of UV-Curable Polyurethane/Zirconia Nanocomposite Coatings