Abstract:Megavolt-class pulsed gas switches play an important role in large pulsers as transfer switches. This article analyzes the breakdown process and characteristics of a megavolt self-triggered preionized switch under 100-ns pulses based on the optical diagnosis. It is discovered that the triggering spark illumination targeting the main cathode or anode can separately preionize the main gap. The discharge channel is likely to first form between trigger electrodes and the main anode. Based on the above deduction, the streamer velocity is calculated to be $0.54 \times 10^{6}$ – $2.34 \times 10^{6}$ m/s, proportional to the electric field. Also, parameters of the empirical formula for calculating the gas heating time are amended. Influence mechanisms of the switch jitter are also studied. Under pulsed preionization mode, the trigger gap breaks down when the main gap electric field is high enough, and the switch jitter is mainly determined by the self-triggering jitter. Nonetheless, the self-triggering jitter can be partly offset during the breakdown process if the changing rate of mean reduced electric field $d(E/p)$ / dt at the self-triggering time is higher than 1.0 $1.0\left(\mathrm{kV} \cdot \mathrm{ns}^{-1} \cdot \mathrm{cm}^{-1} \cdot \mathrm{MPa}^{-1}\right)$ . Under sustaining preionization mode, the trigger gap breaks down prematurely, and the continuous arcing driven by switch leak current preionizes the main gap. Therefore, the influence of the self-triggering jitter on the switch jitter can be eliminated.

A 3-MV Low-Jitter UV-Illumination Switch

Influences of electric field on the jitter of ultraviolet-illuminated switch under pulsed voltages

Design and Experiment of a 4-MV Self-Triggered Switch

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Characteristics of Capacitance-Resistance Coupling UV Illumination Switch

Effects of Optical Pulse Parameters on a Pulsed UV-Illuminated Switch and Their Adjusting Methods

Design of 3 MV UV illumination switch

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

A Low-Jitter Self-Triggered Spark-Discharge Pre-Ionization Switch: Primary Research on Its Breakdown Characteristics and Working Mechanisms

Design and experimental study of two types of low jitter self-triggered switches under nanosecond pulse voltage

Using Self-Triggered Sustaining Pre-Ionization to Obtain Nanosecond Jitter in a MV Pulsed Gas Switch

A 1-MV Low-Jitter High-Reliability Multi-Stage Equal Breakdown Probability Gas Switch

Experimental study of vacuum switch applied in pulse source system

Optical Diagnosis of Preionization Mechanisms and Breakdown Characteristics in a Nanosecond Switch

2.8-Mv Low-Inductance Low-Jitter Electrical-Triggered Gas Switch

Investigation of Ultra-Fast Accurately Synchronization Control GaAs Photoconductive Switches

Development of P-C Switch with Adjustable Gap

A High-Voltage and High-Current Triggered Vacuum Switch

A 80 Kv Gas Switch Triggered by a 17 Μj Fiber-Optic Laser

Optimization of a Nanosecond Pre-Ionization Switch’s Breakdown Jitter Characteristic Based on a Probability Distribution Model of Electron Avalanche’s Initiation

Closing mechanism of electrically-triggered vacuum surface flashover switch