Abstract:Integrating biodegradable cellulose nanopaper into oxide thin-film transistors (TFTs) for next generation flexible and green flat panel displays has attracted great interest because it offers a viable solution to address the rapid increase of electronic waste that poses a growing ecological problem. However, a compromise between device performance and thermal annealing remains an obstacle for achieving high-performance nanopaper TFTs. In this study, a high-performance bottom-gate IGZO/Al2O3 TFT with a dual-layer channel structure was initially fabricated on a highly transparent, clear, and ultrasmooth nanopaper substrate via conventional physical vapor deposition approaches, without further thermal annealing processing. Purified nanofibrillated cellulose with a width of approximately 3.7 nm was used to prepare nanopaper with excellent optical properties (92% transparency, 0.85% transmission haze) and superior surface roughness (Rq is 1.8 nm over a 5 × 5 μm2 scanning area). More significantly, a bilayer channel structure (IGZO/Al2O3) was adopted to fabricate high performance TFT on this nanopaper substrate without thermal annealing and the device exhibits a saturation mobility of 15.8 cm2/(Vs), an Ion/Ioff ratio of 4.4 × 105, a threshold voltage (Vth) of -0.42 V, and a subthreshold swing (SS) of 0.66 V/dec. The room-temperature fabrication of high-performance IGZO/Al2O3 TFTs on such nanopaper substrate without thermal annealing treatment brings industry a step closer to realizing inexpensive, flexible, lightweight, and green paper displays.

High-performance fully transparent Ti-Zn-O thin film transistors

Indium–gallium–zinc–oxide thin-film transistors: Materials, devices, and applications

High-Performance Fully Thermal ALD-Processed IGZO Thin Film Transistors

High-Performance Amorphous InGaZnO Thin-Film Transistor Gated by HfAlOₓ Dielectric with Ultralow Subthreshold Swing

High Performance Indium‐Gallium‐Zinc Oxide Thin Film Transistor via Interface Engineering

Indium–gallium–zinc–oxide Thin-Film Transistors:Materials,devices, and Applications

High-Performance Flexible a-IGZO TFTs Adopting Stacked Electrodes and Transparent Polyimide-Based Nanocomposite Substrates

High-performance fully transparent Ga-doped ZnO TFTs fabricated by RF Magnetron Sputtering

High-Performance Flexible Tin-Zinc-Oxide Thin-Film Transistors Fabricated on Plastic Substrates

Amorphous IZO-based transparent thin film transistors

Large Area, Ultrathin, and Transparent InGaZnO Films from Printing of Liquid Ga–In–Zn Alloys for Thin Film Transistors

Room-Temperature Fabrication of High-Performance Amorphous In-Ga-Zn-O/Al2O3 Thin-Film Transistors on Ultrasmooth and Clear Nanopaper.

Performance Enhancement of Fully Transparent Tin-Doped Zinc Oxide Thin-Film Transistors Fabricated by Sputtering at Low Temperature

Facile Room Temperature Routes to Improve Performance of IGZO Thin-Film Transistors by an Ultrathin Al2O3 Passivation Layer

High-Performance Amorphous InGaZnO Thin Film Transistor With High-k Van Der Waals Molecular Dielectric

High-Performance A-Ingazno Thin-Film Transistors with Extremely Low Thermal Budget by Using a Hydrogen-Rich Al2O3 Dielectric

Design, Properties, and TFT Application of Solution-Processed In-Ga-Cd-O Thin Films

48.2: Invited Paper: High Conductivity & Transparent Aluminum‐based Multi‐layer Source/drain Electrodes for Thin Film Transistors

Room-Temperature-Processed Flexible Amorphous InGaZnO Thin Film Transistor.

Amorphous InGaZnO Thin Film Transistors with Different Transparent Electrodes

Amorphous In-Ga-Zn-O Thin-Film Transistors Fabricated by Microcontact Printing