Abstract:Na incorporation is widely considered to play an important role in low-temperature processed Cu(In, Ga) Se-2 (CIGS) solar cells. In this work, we used post deposition treatment (PDT) method for Na incorporation in CIGS films, which involved the deposition of a thin NaF layer accompanied by thermal annealing. It was found that thermal annealing drove the diffusion of Na into CIGS absorbers without causing loss of elements and change of crystallinity. The dependence of the photovoltaic performance and recombination of CIGS solar cells on the Na PDT temperature was investigated. Impedance spectroscopy and admittance spectroscopy were used to characterize the recombination and defects of CIGS solar cells. The results indicated that the CIGS solar cells with Na PDT exhibited significant improvement of photovoltaic performance compared to those with Na-free. The enhanced transport performances of Na-treated cells were attributed to the decreased space-charge region (SCR) recombination. Both Na-free and Na-treated at 300 degrees C CIGS devices showed a donor defect with activation energy of about 295 meV, while the Natreated devices demonstrated lower density of states, which resulted in an improved V-oc. A maximum conversion efficiency of 11.9% was achieved for CIGS solar cells with Na PDT temperature at 300 degrees C. (C) 2015 Elsevier B.V. All rights reserved.

Na Incorporation in Cu(In,Ga)(Se,S) 2 Films Grown on Insulator-Coated Stainless Steel Foil Using a Metal Precursor Reaction

Effects Of Na Incorporated At Different Periods Of Deposition On Cu(In, Ga)Se-2 Films

Metal Precursor with Bi-Layer Indium for Cu(In,Ga)Se2 Thin Film Preparation

+Three-Step H 2 Se/Ar/H 2 S Reaction of Metal Precursors for Large Area Cu(In,Ga)(Se,S) 2 with Uniform Ga Distribution

Investigation of Copper Indium Gallium Selenide Material Growth by Selenization of Metallic Precursors

Investigation of Cu(In,Ga)Se2 Polycrystalline Growth: Ga Diffusion and Surface Morphology Evolution

Preparation And Characterization Of Cu(In,Ga)Se-2 Thin Films By Selenization Of Cu0.8ga0.2 And In2se3 Precursor Films

Preparation and layer-by-layer solution deposition of Cu(In,Ga)O2 nanoparticles with conversion to Cu(In,Ga)S2 films

Formation of CuInSe2 and Cu(In,Ga)Se2 films by electrodeposition and vacuum annealing treatment

Influences of Na on Sintering of Cu(In, Ga)Se-2 Quaternary Ceramic Targets

Influence of Bilayer Precursor Films on Structure and Morphology of CIGS Films

The Role of Na Incorporation in the Low-Temperature Processed CIGS Thin Film Solar Cells Using Post Deposition Treatment

Influence of Lamination Modes of CuInGa Precursor Films on Composition and Microstructures of Selenized CuInGa Absorber

Effect of sputtering sequence on the properties of Ag-Cu-In-Ga metal precursors and reacted (Ag,Cu)(In,Ga)Se<inf>2</inf> films

Study of Cu–In–Ga Precursor for Cu(In,Ga)Se_2 Thin Film Prepared by the Two-Stage Process

Increase in Conversion Efficiency of above 14% in Cu(In,Ga)3Se5 (Β-Cigs) Solar Cells by Na2S Incorporation Through the Surface of Β –CIGS Film

An Optimized In–CuGa Metallic Precursors for Chalcopyrite Thin Films

Characterization of Cu(In,Ga)(Te,S)2 thin films grown on stainless steel foil substrates

Effects of Alkali Elements on Copper Indium Gallium Aluminum Selenide Flexible Solar Cells Fabricated on Polyimide Substrates

Effect of Se Vapor Concentration on Cigs Film Preparation

Ga-grading Profiles Formed by Incorporation of Gallium into Cu(In1−xGax)Se2 Absorber Thin Films