Abstract:Compared with silicon and silicon carbide devices, the unique electrical and structural characteristics of gallium nitride high electron mobility transistors (GaN HEMTs) make them have different requirements for power module integration. This article proposes a novel integration scheme for the high-voltage lateral GaN HEMT dies without bonding wires. Based on the proposed integration scheme, a compact 650 V/30 A GaN power module with low parasitic parameters and high thermal performance is designed. The GaN dies are sandwiched between two ceramic substrates to improve thermal performance and ensure consistent thermal expansion coefficients. The multiple copper layer structure is used to increase wiring flexibility to reduce parasitic parameters. The design of gate and power loop layouts is discussed, and the common-mode (CM) capacitance is optimized. A comprehensive reliability evaluation is also carried out for this integration scheme. Finally, a double-sided cooling 650 V/30 A full-bridge GaN power module with 2.4 cm×1.3 cm×0.17 cm is fabricated. The thermal resistance is reduced by 30%–48% compared with the conventional single-sided cooling module. The power loop and gate loop inductances are reduced to 0.94 nH and 2 nH, respectively, and the CM capacitance is limited to 2.5 pF. The maximum dv/dt of the drain–source voltage is high as 150 V/ns with only 10% overshoot. Based on the power module, a 3.3-kW two-phase interleaved buck converter is developed. It has 820 W/in3 power density and 98.85% peak efficiency.

An optimized layout with low parasitic inductances for GaN HEMTs based DC-DC converter

A 2–10 MHz GaN HEMTs Half-Bridge Driver with Bandgap Reference Comparator Clamping and Dual Level Shifters for Automotive Applications

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

A Tri-Slope Gate Driving GaN DC–DC Converter with Spurious Noise Compression and Ringing Suppression for Automotive Applications

An Optimized Layout with Split Bus Capacitors in Egan-Based Integrated DC-DC Converter Module

Design of Low-Inductance Switching Power Cell for GaN HEMT Based Inverter

Investigations on Driver and Layout for Paralleled GaN HEMTs in Low Voltage Application

A High Frequency High Efficiency GaN Based Bi-Directional 48V/12V Converter with PCB Coupled Inductor for Mild Hybrid Vehicle

A Multiloop Method for Minimization of Parasitic Inductance in GaN-Based High-Frequency DC–DC Converter

A Gallium Nitride Integrated Power Module with Ultra-low Parasitic Inductances and Thermal Resistance

An Optimization Method for Planar Transformer Winding Losses in GaN Based Multi-output Flyback Converter

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

A Compact Double-Sided Cooling 650V/30A GaN Power Module With Low Parasitic Parameters

Three Dimensional Integration of GaN-HEMT-based DC-DC Converter Using Planar Inductor As a Substrate

A Double-Sided Cooling 650V/30A GaN Power Module with Low Parasitic Inductance

Design Considerations of an Isolated GaN Bidirectional Dc-Dc Converter

A Layout Optimization Method to Reduce Commutation Inductance of Multi-Chip Power Module Based on Genetic Algorithm

Impact of Parasitic Elements on Power Loss in GaN-based Low-voltage and High-current DC-DC Buck Converter

Understanding the Effect of PCB Layout on Circuit Performance in a High-Frequency Gallium-Nitride-Based Point of Load Converter

Design of a Two-stage DC/DC Converter Based on eGaN Devices

Design and Optimization of Gate Driver Integrated Multichip 3-D GaN Power Module