Abstract:<p>The reported laser welding of dissimilar materials (metal and plastic) mostly focuses on the optimization of parameters and process, the process is complex and the cost is high. Liquid crystal polymer (LCP) has attracted much attention due to its excellent electrical properties. With the rapid development of information technology, 5G high-frequency communication is gradually emerging. At the same time, there are many problems to be solved, such as the serious skin effect caused by the large copper foil surface roughness and large energy consumption. Therefore, it is urgent to solve this problem for the development of communication technology. Nowadays, the manufacturing process of a two-layer flexible copper clad laminate is not only complex, but also high production cost. In order to try a new manufacturing method and balance the copper foil surface roughness and the bonding strength between the copper foil and LCP, this study proposes a laser integrated manufacturing method for two-layer flexible copper clad laminates, including LCP laser etching, copper foil laser etching and laser welding. We fabricated regular microstructures on the copper foil surface by laser etching, used ultraviolet laser to irradiate the LCP surface, the copper foil and LCP were welded together by laser conduction welding. The surface roughness of the sample was measured by atomic force microscope, the surface morphology was observed by optical microscope, and the bonding strength and peel strength between the etched copper foil and LCP were tested by micro-tensile test. The welding sample bonding strength obtained by this way can reach the ultimate tensile strength of the copper foil, and the peel strength can reach 682.78 N/m, which is close to the reported peel strength obtained by other methods. High-resolution field emission scanning electron microscope and X-ray photoelectron spectrometer were used to reveal the bonding mechanism of the samples. The integrated method is easier to realize automation for the actual production process. Therefore, we have verified that the two-layer flexible copper clad laminate with high bonding strength and peel strength can be prepared by laser processing.</p>

A Laser-Assisted Bonding Method Using a Liquid Crystal Polymer Film for MEMS and Sensor Packaging

P-56 / A . Murauski P-56 : Aligning Liquid Crystals Using Self-Assembled Monolayers

Bonding of Aluminum Coated Silicon Wafers Based on Polypropylene Carbonate and As a Multi-Functional Sensor

A strategy of wafer-level-plastic-packaging for MEMS based on adhesive bonding

Plastic-Silicon Bonding for MEMS Packaging Application

Mechanical Reliability Assessment of a Flexible Package Fabricated Using Laser-Assisted Bonding

Laser-heating Wire Bonding on MEMS Packaging

Design and Fabrication of High Performance Wafer-Level Vacuum Packaging Based on Glass–silicon–glass Bonding Techniques

Direct bonding of copper foil and liquid crystal polymer by laser etching and welding

Interlocking-interface-enabled Thermally Deformable Liquid Metal/polymer Membrane with High Bonding Strength.

Comprehensive Analysis and Application of Laser Bonding Technology for Glass-Based Integrated Sensors

A low temperature, non-aggressive wafer level hermetic package with UV cured SU8 bond

Wafer Level Vacuum Packaging of MEMS-Based Uncooled Infrared Sensors

Chip Level Packaging for Mems Using Silicon Cap

Microfluidics for High Pressure: Integration on GaAs Acoustic Biosensors with a Leakage-Free PDMS Based on Bonding Technology

Removable Fast Package Technology For Mems Devices Using Polymer Connectors And Silicon Sockets

A Laser-Assisted Thermal Gradient Transient Liquid Phase Bonding Process Design for Thermally Sensitive Components in Hermetic Packaging

A Novel Fabrication Process of MEMS Devices on Polyimide Flexible Substrates

Anodic bonding technology of slender glass tube and silicon in pressure sensor packaging

A hybrid polymer/ceramic/semiconductor fabrication platform for high-sensitivity fluid-compatible MEMS devices with sealed integrated electronics

Thermal debonding pressure-sensitive adhesive blended with liquid crystal polymers