Abstract:With the advent of the 5G wireless networks, achieving tens of gigabits per second throughputs and low, milliseconds, latency has become a reality. This level of performance will fuel numerous real-time applications, such as autonomy and augmented reality, where the computationally heavy tasks can be performed in the cloud. The increase in the bandwidth along with the use of dense constellations places a significant burden on the speed and accuracy of analog-to-digital converters (ADC). A popular approach to create wideband ADCs is utilizing multiple channels each operating at a lower speed in the time-interleaved fashion. However, an interleaved ADC comes with its own set of challenges. The parallel architecture is very sensitive to the inter-channel mismatch, timing jitter, clock skew between different ADC channels as well as the nonlinearity within individual channels. Consequently, complex post-calibration is required using digital signal processing (DSP) after the ADC. The traditional DSP calibration consumes a significant amount of power and its design requires knowledge of the source and type of errors which are becoming increasingly difficult to predict in nanometer CMOS processes. In this paper, instead of individually targeting each source of error, we utilize a deep learning algorithm to learn the complete and complex ADC behavior and to compensate for it in realtime. We demonstrate this "Deep ADC" technique on an 8G Sample/s 8-channel time-interleaved ADC with the QAM-OFDM modulated data. Simulation results for different QAM symbol constellations and OFDM subcarriers show dramatic improvements of approximately 5 bits in the dynamic range with a concomitant drastic reduction in symbol error rate. We further discuss the hardware implementation including latency, power consumption, memory requirements, and chip area.

Design Challenges of High Speed Adc in Cmos Technology for Next Generation Optical Communication Applications

A 40-Mw 7-Bit 2.2-Gs/s Time-Interleaved Subranging ADC for Low-Power Gigabit Wireless Communications in 65-Nm CMOS

A 40-mW 7-bit 2.2-GS/s Time-Interleaved Subranging CMOS ADC for Low-Power Gigabit Wireless Communications.

Design Considerations of Sar Adcs in Cmos Technology for High Speed Circuit Applications with A Time-Interleaved Architecture

High-speed Optical Hold Module in Optical Assisted ADC

A Scalable Adaptive ADC/DSP-Based 1.25-to-56Gbps/112Gbps High-Speed Transceiver Architecture Using Decision-Directed MMSE CDR in 16nm and 7nm

High-speed serial interconnect transceiver: Applications and design

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

Development of Silicon Photonic Devices for Optical Interconnects

Silicon Photonic Network-on-chip and Enabling Components

Time interleaved ADCs for high speed high resolution data acquisition system

Power Scaling in High Speed Analog-to-Digital Converters using Photonic Time Stretch Technique

Deep Analog-to-Digital Converter for Wireless Communication

A 5-GS/s, 13-mW, 2-channel time-interleaved asynchronous ADC in 65nm CMOS

Design on Serial Optical Digital-to-analog Converter and Its Experiment

A 1.5gs/s 6bit 2bit/step Asynchronous Time Interleaved Sar Adc in 65nm Cmos

System-Level Design Of 60ghz Front-End For Gbps High Speed Wireless Communication

A 25-Gs/s 6-Bit Time-Interleaved SAR ADC with Design-for-test Memory in 40-Nm Low-Leakage CMOS

Optical Interconnects In High-Density Data Communications

TI-ADC multi-channel mismatch estimation and calibration in ultra-high-speed optical signal acquisition system

High-speed Optoelectronic Devices